User Manual

E-26

RDS Radio

- Using the Radio Data System (RDS) -

MD-E9000H

■ To automatically play the desired programme

(EON-PTY)

When the desired type of programme is broadcast, the radio switches to it automati-

cally.

1 Tune in to an RDS station (when a station name is displayed).

2 Press the EON button when “EON” appears.

● “PTY TI” will flash for about 4 seconds.

● If the EON button is pressed when “EON” is not displayed, “NO EON” will

appear for 4 seconds to indicate that the unit cannot enter the EON stand-

by mode.

3 Whilst they are displayed, select the desired programme type by

pressing the

5/35/3

5/3

2/42/4

2/4

button.

The selected programme type will flash.

4 Within 4 seconds, press the PTY. TI button.

● The selected programme type and “WAITING” will be displayed for 2 sec-

onds each.

● “PTY” will appear, and the unit will enter the EON-PTY stand-by mode.

Using the Radio Data System (RDS) (continued)

5 When the specified programme starts on an ON (other network)

station, the unit will automatically switch to the station and “PTY”

will flash.

6 When the programme is over, the unit will automatically return

to the original station.

Checking the stand-by mode setting:

When in the EON stand-by mode, press the EON button. (“Programme type” → “WAIT-

ING”)

To cancel the EON stand-by mode:

When in the EON stand-by mode, press the EON button. Within 4 seconds, press it

again. (“PTY” will go out.)

*07-E22-28-MD9000H(SEEG) 01.4.19, 3:08 PM26