Service manual

– 4 –
MD-MT180
OPERATION MANUAL
Using with the Rechargeable Battery
Charging the rechargeable battery
When the rechargeable battery is used for the first time
or when you want to use it after a long period of disuse,
be sure to charge it fully.
After the rechargeable battery is charged or used, it
will get slightly warm. This is normal.
When the portable MD is turned on or operating, the
battery will not be charged.
Do not force the
battery cover
open too far.
AC 120V,
60Hz
To the DC IN
5V jack
Insert the
– side first.
1
Insert the rechargeable battery.
A rechargeable battery other than the AD-N55BT
cannot be charged.
2
Plug the AC adaptor into the AC outlet, and
then insert the plug on the other end into
the DC IN 5V jack.
3
Press the MENU/CHRG button.
The battery indicator will scroll, and battery will be-
gin charging.
Scrolling
■
●
●
Using with the Alkaline Battery
Use one commercially available alkaline battery (LR6,
"AA" size).
When using the alkaline battery, be sure to insert the
rechargeable battery also.
Caution:
While you are using the rechargeable battery and the
alkaline battery at the same time, do not remove either
of them. If you do, when the unit is in the play mode,
playback will stop. When in the recording mode, the
recorded contents will be erased, and the power may
be disconnected.
Do not replace the battery or the rechargeable battery
during operation.
Do not use a rechargeable battery (nickel-cad-
mium battery etc.) in the battery case.
If the unit is not used for a long period of time, remove
the battery. (Even if the power is turned off, the battery
will be drained slowly but continuously.)
2
1
RELEASE LOCK
Open
Press
Back of the
portable MD
1
Open the case cover.
2
Insert an alkaline battery into the battery
case.
3
Attach the battery case to the portable MD.
●
●
●
●