User Manual

03/1/16 MD_MT280E_UK_2.fm
14
MD-MT280E
Preparation
-Hold Function-
Hold Function
To prevent accidental operation, the unit can be locked in
its present condition using the Hold function. When in
Hold, no buttons are active.
Main unit
Press the HOLD button for 2 seconds or more.
If the battery is inserted or the AC adaptor is connected,
you can set this function even when the power is turned
off.
To cancel the hold mode
Press and hold down the HOLD button for 2 seconds or
more whilst the unit is in the hold mode.
"HOLD OFF" will be shown.
Remote control unit
Move the HOLD switch to the safety position (direc-
tion indicated by the arrow).
To cancel the hold mode
Move the HOLD switch away from the safety position (the
opposite direction of the arrow).
Hold Release
If the hold function is active whilst the power is turned
off, the power cannot be turned on by mistake and the
battery will not be drained.
Hold
Orange mark