MiniDisc Player User Manual

■ To check the remaining
disc time
While recording, you can check the
remaining time available on the disc.
Press the DISPLAY button while recording
or while in the recording pause mode.
● When the DISPLAY button is pressed
again, the unit will return to the initial
display.
Note:
● The display of the remaining disc time
may vary slightly from the actual
remaining time. (Page 38)
■ To create your own track
numbers while recording
You can create your own track numbers at
special points in a recording, so that these
points can easily be found later.
At any point where you want to create a
track number while recording, press the
REC button on the main unit or the BASS
button on the remote control unit.
● The track number will be written on the
disc and the recording will continue
uninterrupted.
■ Double time recording in
monaural mode
When recording in the monaural long-play
mode, recordings will be approximately
twice as long as the recording time avail-
able for a stereo recording. The monaural
long-play mode is very useful for recording
conferences or lectures.
Press the MODE/INS button while the
recording is paused.
● Each time this button is pressed, the
display will switch between the stereo
mode and the monaural long-play
mode.
Notes:
● If input is from a stereo source, the
sounds from the left and right channels
will be combined.
● Although the monitor sound you hear in
the headphones while recording is in
stereo, recording will be monaural.
● MiniDiscs recorded in the monaural
long-play mode cannot be played on
other MD players.
● When a recording is made in the
monaural long-play mode, you will be
able to play back the MiniDisc twice as
fast as the normal playback speed.
(Page 24)
● When the unit is stopped after a record-
ing has been made in the monaural
long-play mode, the recording mode
will return to the stereo mode automat-
ically.
Remaining recordable time
Lights up while in the
monaural long-play mode.
17
MD-MS702