MiniDisc Player User Manual

1 Insert the headphones plug firmly into
the headphones jack on the remote
control unit.
2 Plug the remote control unit into the
jack on the main unit. Push the plug
all the way in.
● Since the remote control unit plug has
only one correct orientation, plug it in
as shown in the drawing.
3 Load a MiniDisc in the direction indi-
cated by the arrow on the MiniDisc,
with the label side facing up. (Insert the
MiniDisc firmly, until a click is heard.)
● The power will be turned on automat-
ically, and playback will start from the
first track. (Auto-play function)
● After playback of the last track has
finished, the unit will stop automatically.
Playback does not start when a
MiniDisc is inserted:
Press the button.
In the following cases, the auto-play func-
tion will not work.
● When the recordable MiniDisc write
protection tab is closed (page 9)
● When the auto-play function has been
canceled (page 35)
4 Press the + button to increase the
volume and the - button to decrease
the volume.
5 Adjust the bass level.
Each time the BASS/DEL button is
pressed, the tone will be switched as
follows:
● When recording, it is impossible to ad-
just the bass level (Bass emphasis is
canceled).
● The most recent volume or bass set-
tings are saved when the power is
turned off.
VOL /
NAME
BASS/DEL
BASS
PLAYING A MINIDISC
Track number
Track name
(Nothing will be displayed for MiniDiscs
that do not contain track names.)
BASS 1
BASS OFF
BASS 3
BASS 2
Bass sounds are emphasized more.
Bass sounds are emphasized slightly.
Bass emphasis is canceled.
Bass sounds are emphasized even more.
Volume (0 - 30)
Remote
control unit
For the
left (L)
Headphones
For the
right (R)
To the
jack
21
MD-MS702