MiniDisc Player User Manual

● The continuous recording time is for analog inputs when the volume level is set to

“VOL 0”.

● The continuous play time shows the value when the volume level is set to “VOL 15”.

● The above values are the standard values when the unit is charged and used at an

ambient temperature of 68˚F (20°C).

● The operating time when using alkaline batteries may be different, depending on the

type and manufacturer of the batteries, and on the operating temperature.

Input sensitivity:

Output level:

Dimensions: Width: 3-7/16" (87.0 mm)

Height: 1-3/16" (29.4 mm)

Depth: 3-7/32" (81.5 mm)

Weight: 0.49 lbs. (219 g) with rechargeable battery

Input jack: Line/optical digital, microphone (powered by the main unit)

Output jack: Headphones (impedance: 19 ohms)/

remote control unit

■ MiniDisc Recorder

Type: Portable MiniDisc recorder

Signal readout: Non-contact, 3-beam semi-conductor laser pick-up

Audio channels: Stereo 2 channels/monaural (long-play mode) 1 channel

Frequency response: 20 – 20,000 Hz (± 3 dB)

Rotation speed: Approx. 400 – 900 rpm

Error correction: ACIRC (Advanced Cross Interleave Reed-Solomon Code)

Coding: ATRAC (Adaptive TRansformed Acoustic Coding), 24-bit

computed type

Recording method: Magnetic modulation overwrite method

Sampling frequency: 44.1 kHz (32 kHz and 48 kHz signals are converted to

44.1 kHz, and then recorded.)

Wow and flutter: Unmeasurable (less than ±0.001% W. peak)

Recording level Reference input level Input impedance

MIC H 0.25 mV 10 k ohms

MIC L 2.5 mV 10 k ohms

LINE 100 mV 20 k ohms

Specified

output

Maximum

output level

Load

impedance

Headphones — 10 mW + 10 mW 32 ohms

LINE

300 mV

(-12dB)

— 50 k ohms

MD-MS702