Service manual

MD-R2
– 11 –
How to remove the sled motor/loading motor
(See Fig. 11-1)
1. Remove the screws (D1) x 1 pcs., and remove the sled
motor/loading motor.
Caution:
Be careful so that the gear is not damaged.
(The damaged gear emits noise during searching.)
Figure 11-1
Figure 11-2
Figure 11-3
How to remove the spindle motor
(See Fig. 11-2)
1. Remove the screws (E1) x 3 pcs., and remove the spidle
motor.
Caution:
Be careful so that the turntable is not damaged.
How to remove the optical pickup
(See Fig. 11-3)
1. Remove the screws (F1) x 3 pcs.
Caution:
Be careful so that the gear is not damaged.
(The damaged gear emits noise during searching.)
Sled Motor
Loading
Motor
(D1)x2
ø1.7x2mm
(D1)x2
ø1.7x2mm
Spindle Motor
Turntable
(E1)x3
ø1.7x2.5mm
Optical Pickup
(F1)x3
ø1.7x9.5mm