Service manual

MD-R2
– 4 –
OPERATION MANUAL
Names of controls
1. Remote Control Transmitter Window
2. Direct Key Buttons
3. Play Mode Button
4. Music Scan Button
5. Input Select Button
6. Display Button
7. Time Button
8. Auto Mark Button
9. Track Down/Review Button:
10. Track Up/Cue Button:
11. Power Button
12. Program Button
13. Clear Button
14. Synchro Record Button:
15. Record Cancel Button
16. Record Mode Button
17. Record Button:
18. Play/Pause Button:
19. Stop Button:
1
12
13
14
15
16
17
18
19
2
3
4
5
6
7
8
9
10
11
SETTING THE CLOCK
When recording, the date and time are recorded on the Minidisc.
Setting the date
1
Press the POWER button to turn the power on and press the TIMER button.
2
Within 10 seconds, turn the jog dial until “TIME ADJUST” appears.
3
Within 10 seconds, press the ENTER button.
The unit will enter the date setting mode.
4
Set the “year” using the jog dial.
When you turn the jog dial and let go, the year will change up or down by one. The year 2000 or later is set as follows: [00] indicates the year 2000 [01] indicates the year 2001 The range of dates that can be entered is from January 1, 1997 to December 31, 2099.
5
Press the ENTER button to set the “year”.
6
Set the “month” repeating steps 4 and 5.
7
Set the “day” repeating steps 4 and 5.
The unit will enter the time setting mode.
ENTER
DELETE/CLEAR
TIMER
POWER
DATE
CLOCK CLOCK
DATE
CLOCK
7 6 5 3
4
2 1
AM
AM
Date setting mode
Each time the button is pressed, the display will change.
Time setting mode