Specifications

<P=005>
(Continued)
■ When choosing a CD for playback
CD
DISC-1
DISC-2
DISC-3
MD
ON/STAND-BY
VOLUME
TUNER
(BAND)
MODE
ON/OFF
CD PLAY
1
2
3
CD MD DIGITAL EDIT
NAME /
TOC EDIT
TIMER /
DELETE DISPLAY
ENTER
TRACK START
CD PLAY
1
2
3
TUNING
CURSOR
REC
1 2 3
SURROUND
3D
CD
1 2 3
1 2 3 4 5
6
10
7 8 9 10/0
PROGRAM
MD/CD/TUNER DIRECT KEY
TIMESLEEP DISPLAY
VOLUME
MODE ON/OFF
SURROUND
AUTO
MARK
REC
MODE
AUX
3D
REC
BASS/
TREBLE
P-MODE
CD
CLEAR
ST-MODE TUNER
BAND
MD
1 2 3
1 2 3
1 2 3
CD
ON/
STAND-BY
Press one of the buttons CD PLAY 1 - CD PLAY 3 to select the
CD you want to listen to.
● Only the selected CD will be played back.
When selecting
disc tray 1
When selecting
disc tray 2
When selecting
disc tray 3
1
2
3
1
2
3
1
2
3
Notes:
● If any disc tray is open, it will be automatically closed.
● If the CD button is pressed, continuous playback will
be performed from the first track of disc 1, even after disc 2
or disc 3 has been selected.
Direct playback:
If a CD is loaded in the unit, pressing the CD button turns
the power on and begins playback.
Cautions:
● Do not carry the unit whilst CD’s are in the trays or a MiniDisc
is loaded. The discs may come loose inside the unit and be
damaged or cause damage to the unit. This may also cause
malfunctions.
● Do not place two CDs in one disc position.
● Do not push the disc tray whilst it is moving.
● Do not attempt to push the disc tray by hand. This may cause
malfunctions.
● If power fails whilst the tray is open, wait until the power
supply returns or gently push the tray manually to close it.
● If the disc tray is stopped forcibly, "TRAY ERROR" will appear
on the display and the unit will not function.
If this occurs, turn off the ON/STAND-BY switch and turn it
on again.
● If TV or radio interference occurs during CD operation, move
the unit away from the TV or radio.
● If a disc is damaged, dirty, or loaded upside down, the disc
will be skipped and the next disc will be automatically played.
● If the CDs are dirty or have label adhesive on their surface,
make sure to clean them before loading. If a rental CD is
loaded or a label has been peeled off from the CD, the sur-
face may be dirty or sticky. Wipe any dirt from the surface.
If a dirty CD is loaded and played back, it may become dam-
aged, or it could become stuck in the unit.
● If the CD button, CD PLAY 1 - 3 button or the button
is pressed when a disc tray is open, the disc tray will be
automatically closed. Be careful not to catch your finger.
● If the machine is shaken by impact or vibration, playback may
be disrupted. If the playback volume of a CD is raised ex-
cessively, playback may be disrupted. If this happens, lower
the playback volume.
MD-ZV30H TINSZ0217AWZZ
E-10