Specifications

<P=005>
(Continued)
■ Sleep operation
The radio, compact disc and MiniDisc can all be turned off auto-
matically.
1 Play back the desired sound source.
2 Press the TIMER/DELETE button.
3 Turn the jog dial so that the "SLEEP" display appears.
4 Within 10 seconds, press the ENTER button.
● If you do not need to change the time, go to step 5.
To change the sleep time:
CD
DISC-1
DISC-2
DISC-3
MD
ON/STAND-BY
VOLUME
TUNER
(BAND)
MODE
ON/OFF
CD PLAY
1
2
3
CD MD DIGITAL EDIT
NAME /
TOC EDIT
TIMER /
DELETE DISPLAY
ENTER
TRACK START
TUNING
CURSOR
REC
1 2 3
SURROUND
3D
SLEEP
2 3 4,5
1 2 3 4 5
6
10
7 8 9 10/0
PROGRAM
MD/CD/TUNER DIRECT KEY
TIMESLEEP DISPLAY
VOLUME
MODE ON/OFF
SURROUND
AUTO
MARK
REC
MODE
AUX
3D
REC
BASS/
TREBLE
P-MODE
CD
CLEAR
ST-MODE TUNER
BAND
MD
1 2 3
12 3
ON/
STAND-BY
3
4
5
Whilst the sleep time is displayed, turn the jog dial to adjust the
time.
(Maximum: 2 hours - Minimum: 1 minute)
The amount of sleep time can also be changed during the sleep
operation.
● 2 hours - 5 minutes → 5-minute intervals
● 5 minutes - 1 minute → 1-minute intervals
5 Press the ENTER button.
6 The unit will turn off automatically after the preset sleep time
has elapsed.
● The volume will decrease gradually 1 minute before the preset
sleep time has elapsed. At this time, you cannot change the
volume.
To confirm the sleep timer setting:
1 Press the TIMER/DELETE button.
2 Turn the jog dial so that the "SLEEP" display appears.
To cancel the sleep operation:
If the power is turned off, the sleep operation will be cancelled.
The timer operation can also be cancelled as follows if the power
cannot be turned off during recording.
1 Press the TIMER/DELETE button.
2 Turn the jog dial so that the "SLEEP OFF" display appears.
3 Within 10 seconds, press the ENTER button.
● The sleep operation will be cancelled. ("SLEEP" will go off.)
Notes:
● Once the sleep time is set, it will remain the same duration
until the setting is changed.
● This sleep functions of this unit cannot be used to control
equipment connected to this unit. You must use the sleep
functions of the other equipment, if it has them.
■ Simultaneous sleep and timer operation
1 Play the desired item (compact disc, MiniDisc, etc.).
2 Set the sleep timer.
3 Set timer playback.
4 When the preset sleep time has elapsed, the power will be
automatically turned off. When the timer start time is reached,
the power will be turned on again.
Note:
● The unit can also be used by a combination of the sleep
timer and timer recording function.
To set or cancel the sleep operation using the
remote control:
Press the SLEEP button.
To cancel the sleep operation:
Press the SLEEP button twice.
Note:
● The sleep time cannot be set using the remote con-
trol.
Sleep timer setting
Timer playback setting
Start time
(Wake-up start)
1 minute - 2 hours
Desired time
Sleep operation will
automatically stop.
End time
(Wake-up end)
MD-ZV30H TINSZ0217AWZZ
E-35