Specifications

ManualsBrandsSharp ManualsComputer equipmentMD-ZV30

<P=002>

PRECAUTIONS

■ General

● Please ensure that the equipment is positioned in a well

ventilated area and ensure that there is at least 5 cm of

free space along the sides, top and back of the equip-

ment.

● Do not use oil, solvents, petrol, paint thinners or insec-

ticides on the unit.

● Do not expose the unit to moisture, to temperatures

higher than 60˚C (140˚F) or to extreme low temperatures.

● Keep the unit away from direct sunlight, strong magnetic

fields, excessive dust, humidity and electronic/electrical

equipment (home computers, facsimiles, etc.) which

generates electrical noise.

● Hold the AC power plug by the head when removing it

from the AC socket, since pulling the lead can damage

internal wires.

● Remove the AC power plug from the wall socket before

cleaning the heads, pinch rollers, etc.

This unit contains dangerous voltages.

Do not remove the outer cover, as this may result in

electric shock. Refer internal service to your local SHARP

service facility.

● Use the unit on a firm, level surface free from vibration,

and do not place anything on the top of the unit.

● If the unit does not work properly whilst in use, set the

ON/STAND-BY switch to STAND-BY, then disconnect

the AC power lead from the AC socket. Plug the AC

power lead back in, and then set the ON/STAND-BY

switch to ON.

● If a lightning storm is taking place near you, it is sug-

gested that you disconnect the AC power lead from the

AC socket for safety.

Warning:

The voltage used must be the same as that specified on

this unit. Using this product with a higher voltage than that

which is specified is dangerous and may result in a fire or

other type of accident causing damage. SHARP will not be

held responsible for any damage resulting from use of this

unit with a voltage other than that which is specified.

■ Volume control

It is advisable to avoid exposure to high volume levels, which

occur whilst turning the unit on with the volume control set-

ting up high, or whilst continually listening at high volumes.

■ Condensation

Sudden temperature changes, storage or operation in an

extremely humid environment may cause condensation in-

side the cabinet (CD pickup, MD pickup, etc.) or on the

transmitter window on the remote control.

Condensation can cause the unit to malfunction.

If this happens, leave the power on with no disc in the unit

until normal playback is possible (about 1 hour) or wipe off

any condensation on the transmitter window with a soft cloth

before operating the unit.

■ Care of compact discs

Compact discs are fairly resistant to damage, however mis-

tracking can occur due to an accumulation of dirt on the

disc surface.

Follow the guidelines below for maximum enjoyment from

your CD collection and player.

● Do not write on either side of the disc, particularly the

non-label side. Signals are read from the non-label side.

Do not mark this surface.

● Keep your discs away from direct sunlight, heat, and ex-

cessive moisture.

● Always hold the CDs by the edges. Fingerprints, dirt, or

water on the CDs can cause noise or mistracking. If a

CD is dirty or does not play properly, clean it with a soft,

dry cloth, wiping straight out from the centre, along the

radius.

■ About the transport card

This unit is shipped with a transport card in place to prevent

damage during shipping.

Before using, follow these steps to remove the transport

card:

1 Set the ON/STAND-BY switch to ON.

2 Press the button of the disc 1 to open the disc tray.

3 Remove the transport card.

DISC-1

DISC-2

DISC-3

VOLUME

TUNER

(BAND)

MODE

ON/OFF

CD PLAY

CD MD DIGITAL EDIT

NAME /

TOC EDIT

TIMER /

DELETE DISPLAY

ENTER

TRACK START

TUNING

CURSOR

REC

1 2 3

SURROUND

ON/STAND-BY