User Manual

7-5

SYSTEM SETTINGS►SETTING MODE LIST

SETTING MODE LIST

The following is a list of setting mode items, factory default settings and restrictions for each item.

Status

U: General user; A: System administrator/Administrator

* Some settings can only be configured by the administrator.

Address Book

U: General user; A: System administrator/Administrator

*1 This setting is configured in setting mode on the web page.

*2 Set the Category Setting in System Settings→Image Send Settings→Common Settings→Category Setting of the machine's

setting mode.

SETTING MODE LIST

• Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings.

• Some setting items can only be configured on the Web page.

Setup Items Factory default setting U A

■ Status (page 7-49)

● Machine Identification (page 7-49) – Yes

Yes

● Total Count (page 7-50) – Yes Yes

● Device Status (page 7-50) – Yes Yes

● Network Status (page 7-51) – Yes Yes

● Firmware Version (page 7-51) – Yes Yes

● Power Reset (page 7-52) – No Yes

● Data List (page 7-52) – Yes Yes

X List for User – Yes Yes

X List for Administrator – No Yes

Setup Items Factory default setting U A

■ Address Book (page 7-54)

● Address Book (page 7-54)*

– Yes Yes

● Category Setting (page 7-56)*

– Yes Yes