User Manual

7-29
SYSTEM SETTINGS►SETTING MODE LIST
+ View Password Entry Screen Display in Both PC and MFP No Yes
 Easy Mode Settings – No Yes
 Favorite Key Setting – No Yes
 Mode Key Display Setting No Yes
• Modes to Display – No Yes
• Display Mode Keys on Home Enabled No Yes
X Keyboard Settings No Yes
 Default Keyboard Setting No Yes
• Keyboard Select Varies depending on country and
region
No Yes
• Set Keyboard Priority Varies depending on country and
region
No Yes
 Soft Keyboard Template Setting – No Yes
X Device Control No Yes
 Original Size Detector Setting No Yes
• Original Detection Size Combination AB-1 (Inch-1) No Yes
• Cancel Detection at Document Glass Disabled No Yes
 Original Feeding Mode All Off No Yes
 Automatic Saddle Stitch*
7
Enabled No Yes
 Saddle Stitch Position Adjust*
7
Enabled No Yes
 Paper Type for Auto Paper Selection Plain No Yes
 Tandem Connection Setting No Yes
• IP Address of Client Machine 0.0.0.0 No Yes
• Port Number 50001 No Yes
• Tandem Mode No Yes
- Disabling of Master Machine Mode Disabled No Yes
- Disabling of Client Machine Mode Disabled No Yes
 Auto Switching of Finisher Trays*
8
Enabled No Yes
 Detect Standard in Auto Colour Mode 3 (Normal) No Yes
 Status Indicator Setting Pattern 1 No Yes
• Status Indicator will blink if data is received Enabled No Yes
 Total Setting for Finish Specify Finishing Position Based
on Paper Selected.
No Yes
 Plain Paper Weight Settings No Yes
• Paper Weight 60 to 89g/m
2
(16 to 23 lbs. ) No Yes
 Data List One Sided No Yes
 Disabling of Duplex Disabled No Yes
Setup Items Factory default setting U A