DIGITAL FULL COLOR MULTIFUNCTIONAL SYSTEM MX-2310U/MX-3111U START GUIDE Keep this manual close at hand for reference whenever needed.
Each instruction also covers the optional units used with these products. Caution! For complete electrical disconnection, pull out the main plug. The socket-outlet shall be installed near the equipment and shall be easily accessible. FAX interface cable and Line cable These special accessories must be used with the device. To reduce the risk of fire, use only UL-Listed No.26 AWG or larger telecommunication line cord. FOR YOUR RECORDS ...
This machine contains the software having modules developed by Independent This product includes Adobe® Flash® technology of Adobe Systems JPEG Group. Incorporated. Copyright© 1995-2007 Adobe Macromedia Software LLC. All rights reserved. SOFTWARE LICENSE The SOFTWARE LICENSE will appear when you install the software from the CD-ROM. By using all or any portion of the software on the CD-ROM or in the machine, you are agreeing to be bound by the terms of the SOFTWARE LICENSE.
Contents CAUTIONS ———————————————————————————— 5 SPECIFICATIONS ———————————————————————— 15 Symbols in this manual ———————————————————————— 5 Basic Specifications / Copier specifications ——————————————— 15 Power notes ————————————————————————————— 5 Automatic document feeder (Standard equipment) ———————————— 16 Installation notes ——————————————————————————— 6 Tray ————————————————————————————————— 16 About consumables —————————————————————————— 7 Finisher ——————————————————————————————— 16 Ha
CAUTIONS Symbols in this manual WARNING To ensure safe use of the machine, this manual uses various safety symbols. The safety symbols are classified as explained below. Be sure you understand Indicates a risk of death or serious injury. CAUTION Indicates a risk of human injury or property damage. the meaning of the symbols when reading the manual.
Installation notes CAUTION Do not install the machine on an unstable or slanted surface. Install the machine on a surface that can withstand the weight of the machine. Risk of injury due to the machine falling or toppling. If peripheral devices are to be installed, do not install on an uneven floor, slanted surface, or otherwise unstable surface. Danger of slippage, falling, and toppling. Install the product on a flat, stable surface that can withstand the weight of the product.
About consumables CAUTION Do not throw a toner cartridge into a fire. Store a toner cartridge out of the reach of children. Toner may fly and cause burns. Handling precautions WARNING Do not place a container of water or other liquid, or a metal object that might fall inside, on the machine. If you notice smoke, a strange odor, or other abnormality, do not use the machine. If the liquid spills or the object falls into the machine, fire or electrical shock may result.
CAUTION Do not look directly at the light source. Doing so may damage your eyes. Do not block the ventilation ports on the machine. Do not install the machine in a location that will block the ventilation ports. Blocking the ventilation ports will cause heat to build up in the machine, creating a risk of fire. The fusing unit and paper exit area are hot. When removing a misfeed, do not touch the fusing unit and paper exit area. Take care not to burn yourself.
SUPPLIES Standard supplies for this product that can replaced by the user include paper, toner cartridges, and staple cartridges for the finisher. For best copying results, be sure to use only Sharp Genuine Be sure to use only SHARP-specified products for the toner cartridges, finisher Supplies which are designed, engineered, and tested to staple cartridge, and transparency film. maximize the life and performance of Sharp products.
Emission of noise and chemicals Noise emission values Noise emission values as measured according to ISO7779 are listed to the right. Sound power level LWAd Printing mode (continuous printing) MX-2310U MX-3111U 7.5 B 7.
Part Names 1 2 3 4 5 6 1 Automatic document feeder 2 Front cover 7 3 Output tray (Center tray) 4 Operation panel 5 Right tray 6 [POWER] key ( ) 7 Bypass tray 8 Main power switch 8 9 Tray 1 10 Tray 2 (when paper feed tray is installed)* 11 Tray 3 (when paper feed tray is installed)* 12 Tray 4 (when paper feed tray is installed)* * Peripheral device.
TURNING THE POWER ON AND OFF This machine has two power switches. The main power switch is at the bottom left after the front cover is opened. The other power switch is the [POWER] key ( the operation panel. ) on Turning on the power (1) Switch the main power switch to the “ (2) Press the [POWER] key ( ” position. ) to turn on the power. Turning off the power (1) Press the [POWER] key ( ) to turn off the power. (2) Switch the main power switch to the “ ” position.
OPERATION MANUALS AND HOW TO USE THEM The instructions for this manual are separated in the following three sections. TINSE4976FCZZ 2011D KS2 PRINTED IN CHINA Before using the machine Printing and faxing from a computer Directions for use 335 Britannia Road East, Mississauga, Ontario, L4Z 1W9 SHARP ELECTRONICS OF CANADA LTD. www.sharpusa.com 1 Sharp Plaza, Mahwah, New Jersey 07495-1163.
How to read the Operation Guide The [Operation Guide] can be downloaded from the machine and viewed on a computer. You can download the [Operation Guide] following the procedures below while the machine is connected to the network. 1 Confirm the machine’s IP address First, press the [SYSTEM SETTINGS] key on the operation panel and then touch [List Print (User)] when it appears on the touch panel. Next, select [NIC Page] from [Printer Test Page] and then touch the [Print] button.
SPECIFICATIONS Basic Specifications / Copier specifications Name Type MX-2310U/MX-3111U Same size: 1:1 ± 0.8 % Enlarge: 121 %, 129 %, 200 %, 400 % Desktop Copy rations Color Full color Copier system Laser electrostatic copier total 376 increments.
SPECIFICATIONS Automatic document feeder (Standard equipment) Name Reversing Single Pass Feeder (RSPF) Document feeder types Reversing Single Pass Feeder (RSPF) Original paper sizes 11" × 17" (A3) to 5-1/2" × 8-1/2" (A5) Paper storage capacity Plain paper 13 lbs. (50 g/m2) to 32 lbs. (128 g/m2) Two-sided (or maximum stack height of 33/64" (13 mm)) B/W: 50 one-sided sheets/minute (8-1/2" × 11" (A4) horizontal) Paper weight Thin paper 9 lbs. (35 g/m2) to 13 lbs.
Punch module Name Paper size for punch module Holes Punch module (MX-PN11B) for finisher Required power supply Supplied from finisher 11" × 17" (A3) to 7-1/4" × 10-1/2"R (A4) Weight Approx. 7 lbs. (3 kg) Cannot punch special types of paper such as OHP.
SPECIFICATIONS Network Printer Specifications Type Built-in type Internal fonts (options) 80 fonts for PCL, 136 fonts for PS3 emulation Continuous print speed Same as continuous copy speed Memory Machine system memory and hard disk. Data processing: 600 × 600 dpi, Print 600 × 600 dpi, Interface 10BASE-T/100BASE-TX/1000BASE-T, USB 2.0 (high speed mode) Resolution equivalent to 9600 × 600 dpi Standard SAPL-c *1 *1: SAPL is the abbreviation for Sharp Advanced Printing Language.
Administrator Name: Contact at: Information that the administrator of the machine requires is printed on the back of this page. (Separate this page from the manual and keep it in a safe place. In addition, fill in the name of the administrator and the administrator’s contact information in the left hand margin.
TO THE ADMINISTRATOR OF THE MACHINE System settings password A password is necessary to change the machine’s system settings using administrator authority. System settings can be changed from either the operation panel or using a computer web browser. After setting up the machine, refer to [SYSTEM SETTINGS] in the Operation Guide to set a new password.
For the users of the fax function ABOUT THE TELEPHONE CONSUMER PROTECTION ACT OF 1991 The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including FAX machines, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the mess
This equipment connects to the telephone network through a standard USOC RJ-11C network interface jack. If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. This equipment may not be used on coin service provided by the telephone company.
Trademark acknowledgments The following trademarks and registered trademarks are used in conjunction with the machine and its peripheral devices and accessories. • Microsoft®, Windows®, Windows® 2000, Windows® XP, Windows Server® 2003, Windows Vista®, Windows Server® 2008, Windows® 7 and Internet Explorer® are registered trademarks or trademarks of Microsoft Corporation in the U.S.A. and other countries. • PostScript is a registered trademark of Adobe Systems Incorporated.
MX-2310U/MX-3111U START GUIDE SHARP ELECTRONICS CORPORATION 1 Sharp Plaza, Mahwah, New Jersey 07495-1163. www.sharpusa.com SHARP ELECTRONICS OF CANADA LTD.