Operation Manual

ManualsBrandsSharp ManualsMultifunction DevicesMX-3570N

841

842

843

844

845

846

847

848

849

850

7-144

SYSTEM SETTINGS►SYSTEM SETTINGS

Use Banner

Set this option to use the banner. The default setting is "Invalid".

RAW

Raw Print Settings

Raw Print

Set this option to use RAW printing. The default setting is "Valid".

Port Number

Enter a port number. The default setting is port 9100.

Timeout

Enter a timeout. The default setting is 90 seconds.

Use Bidirectional

To use bidirectional communication, set to .

WSD

WSD Settings

WSD Print

Set this option to use WSD printing.

Use Multicast Discovery

Set this option to use multicast discovery.

Google Cloud Print Settings

Google Cloud Print

Specify whether or not Google Cloud Print is used.

Always Retain Prints

The retention print function can be enabled in Google Cloud Print.

When this setting is enabled, Google Cloud Print jobs are saved in the "Main Folder" of document filing.

When disabled, the machine starts printing immediately after reception of a Google Cloud Print job.

Status

"Not Set", "Registering", "Registered", or "Offline" will appear.

E-mail

This shows the e-mail address of the Google account of the administrator who registered the machine in Google Cloud

Print.

Device Name

Set the device name that appears on the client device.

This setting is the same as the device name on the machine information page of the status.

This appears when the "Status" is "Not Set".

Tap this key to show the registration information on the operation panel.

Open the Web browser on your device and go to the URL that is displayed.

When the Google account login page appears in your Web browser, enter the Google account information of the

administrator of the machine.

Follow the instructions that appear after you log in to complete the registration procedure for the machine.

When you have successfully completed registration, the “Status” changes to “Registered”.

Complete the registration procedure within 10 minutes after the registration information is shown. If you fail to complete

registration within this time, the status will change from “Registering” back to “Not Set”.