Quick Guide

13
Double-tap
Lightly strike the touch panel two times. Used
to change the preview display mode, or
enlarge the preview image.
Flick
Flick (quickly swipe with the finger) to scroll
the preview image.
Tap
Touch and then quickly release the finger.
Used to select keys, tabs, checkboxes, etc.
Long-touch
Touch a key and keep the finger on the key
for a short time.
Slide
Slide the finger on the scroll bar to move up
or down through a long list.
Drag
Drag (slide the finger in the desired direction)
to rotate or delete original pages displayed as
a preview.
The home screen is the first screen to be displayed. Touch an icon to display the
corresponding screen. When the button is pressed on the operation panel, this
home screen is displayed.
* The actual screen displayed may vary depending on the model or how the machine
has been customized.
OPERATING THE TOUCH PANEL
In addition to the conventional "single tap" operation, you can also operate the touch panel using long touches, flicks, and slides.
HOME SCREEN
Up to 10 icons are always displayed.
Fixed area
Up to 12 icons are displayed.
Ic on s tha t are no t dis pl ay e d ca n be
displayed by scrolling horizontally.
Scroll area
HDD file retrieve
Operation Guide
Job status
System settings
The scanned original is saved.
Saved data can be edited and used again for another operation.
Copy
The scanned original is printed.
E-mail
Fax
The scanned original is attached to an e-mail and sent.
The scanned original is sent using the telephon line.
FTP/Desktop
The scanned file is sent to a specified
directory of an FTP server or to a specified
folder on a computer connected to the
network.
Network folder
The scanned original is sent to the specified
shared folder on a computer connected to
the Windows network.
Displays the status of the current job.
PC scan
A T WA I N - c o m pl ia nt a p p l ic at io n o n a
computer connected to the network is used
to scan a document or image.
Image send
The scanned original is sent to the specified destination.
Allows various settings to be adjusted
according to how the machine will be used
or its current state of use.
Refer to the Operation Guide when you have
questions about operating the machine.