Government Compliance

Page 10 of 15
k-(3) If key repeat is supported, the controls, an
input method shall be delay before repeat shall be
adjustable.
*[For Input through key, touch panel]
(1)Key repeat function can set repeat start time, or this
function is nonactivated.
(2) Key repeat function can control repeat start time(t1)
up to 2 seconds or disable it.
k-(4) The status of all locking or toggle controls or
keys shall be visually discernible, and discernable
through touch or sound.
Criteria
Supporting Features
Remarks and explanations
(d) When biometric forms of user identification or
control are used, an alternative form of identification
or activation, which does not require the user to
possess particular biological characteristics, shall also
be provided.
Not Applicable
No biometric forms of user identification is used.
(e) When products provide auditory output, the audio
signal shall be provided at a standard signal level
through an industry standard connector that will allow
for private listening. The product must provide the
ability to interrupt, pause, and restart the audio at
anytime.
Not Applicable
No auditory output will be provided.
(f) When products deliver voice output in a public
area, incremental volume control shall be provided
with output amplification up to a level of at least 65
dB. Where the ambient noise level of the environment
is above 45 dB, a volume gain of at least 20 dB above
the ambient level shall be user selectable. A function
shall be provided to automatically reset the volume to
the default level after every use.
Not Applicable
No voice output will be delivered in a public area.
(g) Color coding shall not be used as the only means
of conveying information, indicating an action,
prompting a response, or distinguishing a visual
element.
Not Applicable
Color coding is not used without description.
(h) When a product permits a user to adjust color and
contrast settings, a range of color selections capable
of producing a variety of contrast levels shall be
provided.
Supports
Color contrast levels can be adjusted.
(i) Products shall be designed to avoid causing the
screen to flicker with a frequency greater than 2 Hz
and lower than 55 Hz.
Supports
[For Touch Panel]
Applicable.