Owner's Manual
17
STORING A DOCUMENT ONLY (Scan to HDD)
Scan to HDD is used to store the image file of a scanned document in the Main Folder or a Custom Folder. Neither
printing nor transmission are performed.
"Scan to HDD" SCREEN
The following screen appears when the [Scan to HDD] key is touched in the base screen of document filing mode.
Touch the keys described below as needed to select Scan to HDD settings.
(1) [Color Mode] key
Use this key to select the color mode when storing the
document.
☞ ORIGINAL SETTINGS FOR "Scan to HDD" (page
19)
(2) [Job Detail Settings] key
Touch this key to select the exposure, resolution, and
compression ratio.
☞ ORIGINAL SETTINGS FOR "Scan to HDD" (page
19)
(3) [Original] key
Touch this key to set the original size and select
two-sided document scanning. The automatically
detected original size appears in the top half of the
[Original] key.
☞ Selecting the original size and two-sided document
scanning (page 21)
(4) [Back] key
Touch this key to return to the base screen of document
filing mode.
(5) [Special Modes] key
Select special modes for Scan to HDD, including erase,
dual page scan, and card shot.
☞ Special modes screen for Scan to HDD (page 21)
(6) [File Information] key
Touch this key to append information to the file. The
settings are configured in the same way as file
information for "File".
☞ FILE INFORMATION (page 15)
PERFORMING "Scan to HDD"
Back
Mono2/Auto
Ready to scan to HDD.
Press [Start] to scan original.
Color Mode
Auto 8 X11
Original
Job Detail
Settings
Special Modes
File
Information
1
/
2
(2)
(3)
(1)
(5)
(6)
(4)
Scan to HDD
DOCUMENT
FILING
1
Place the original.
Place the original face up in the document feeder tray, or face
down on the document glass.
11