Owner's Manual

156
9
Specify the end receiving machines.
(1) Touch the keys of the end receiving
machines.
The end receiving machines are entered in the order that
they are touched.
(2) Touch the [OK] key.
To directly enter the fax number of an end receiving machine with the numeric keys, follow the steps below. Note
that if "Disable Direct Entry" (page 188) is enabled in the system settings for fax (administrator), direct entry will not
be possible.
(1) Touch the [Direct Entry] key.
(2) Enter fax number with the numeric keys.
(3) Touch the [OK] key.
To check the addresses that have been entered, touch the [Address Review] key in the address selection screen.
To delete an end receiving machine, touch the key of the machine that you wish to delete and then touch the
[Release] key. When you have finished checking the end receiving machines, touch the [OK] key.
10
Touch the [Exit] key.
To program another memory box...
Touch the [Next] key and repeat the procedure from step 5.
F-Code Memory Box / Relay Broadcast
Select address.
OK
AAA AAA
CCC CCC
EEE EEE
BBB BBB
1/2
0
DDD DDD
FFF FFF
Direct Entry
Address Review
Sort Address
UVWXYZOPQRSTJKLMNEFGHIABCDFrequent Use
(1)
(2)
F-Code Memory Box / Relay Broadcast
No.001
ExitNext
Box Name
Sub Address
Recipient
Relay Broadcast
000000/111111
10 Addresses
Registration is completed.