User Manual

2-11
COPIER►BEFORE USING THE MACHINE AS A COPIER
Standard sizes
Standard sizes are sizes that the machine can automatically detect.
To specify the standard size, select [System Settings] in "Settings (administrator)"→ [Common Settings] → [Device
Control] → [Original Size Detector Setting].
List of original size detector settings
* In the size notation above, when the size is suffixed by "R" like "A4R", it indicates a case where a sheet available in
both the vertical and horizontal orientations are set horizontally.
Selections
Standard sizes (detected original sizes)
Document glass Document feeder tray (automatic document
feeder)
AB-1 A3, A4, A4R, A5, B4, B5, B5R 8-1/2" x 11", 8-1/2" x 14", 11" x 17", A3, A4, A4R, A5,
B4, B5, B5R
AB-2 A3, A4, A4R, A5, B5, B5R, 216 mm x 330 mm
(8-1/2" x 13")
8-1/2" x 11", 11" x 17", A3, A4, A4R, A5, B4, B5, B5R,
216 mm x 330 mm (8-1/2" x 13")
AB-3 A4, A4R, A5, B4, 8K, 16K, 16KR 8-1/2" x 11", 11" x 17", 216 mm x 330 mm (8-1/2" x
13"), A3, A4, A4R, A5, B4, 8K, 16K, 16KR
AB-4 216 mm x 340 mm (8-1/2" x 13-2/5"), A3, A4, A4R,
A5, B5, B5R
8-1/2" x 11", 11" x 17", 216 mm x 340 mm (8-1/2" x
13-2/5"), A3, A4, A4R, A5, B4, B5, B5R
AB-5 216 mm x 343 mm (8-1/2" x 13-1/2"), A3, A4, A4R,
A5, B5, B5R
8-1/2" x 11", 11" x 17", 216 mm x 343 mm (8-1/2" x
13-1/2"), A3, A4, A4R, A5, B4, B5, B5R
Inch-1 11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8-1/2" x 11"R,
5-1/2" x 8-1/2"
11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8-1/2" x 11"R,
5-1/2" x 8-1/2", A3, A4
Inch-2 11" x 17", 8-1/2" x 13" (216 mm x 330 mm),
8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2"
11"x17", 8-1/2"x13" (216 mm x 330 mm), 8-1/2"x11",
8-1/2"x11"R, 5-1/2"x8-1/2", A3, A4
Inch-3 11" x 17", 8-1/2" x 13-2/5" (216 mm x 340 mm),
8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2"
11"x17", 8-1/2"x13-2/5 (216 mm x 340 mm),
8-1/2"x11", 8-1/2"x11"R, 5-1/2"x8-1/2", A3, A4
• Even when [Original] is set to [Auto], some original sizes may be detected as other one that is near the standard size.
In this case, manually set the original size.
► SELECTING THE ORIENTATION AND SIZE OF THE ORIGINAL (page 2-33)
• When placing a non-standard size original on the document glass, you can make it easier for the size to be detected by
placing a blank sheet of A4 (8-1/2" x 11"), B5 (5-1/2" x 8-1/2"), or other standard size of paper on top of the original.