Specifications
Table Of Contents
- INTRODUCTION
- CONTENTS
- USING THE MANUAL
- DIFFERENCES BETWEEN MODELS
- BEFORE USING THE MACHINE
- PRINTER
- TROUBLESHOOTING
- ROUTINE MAINTENANCE
- SYSTEM SETTINGS
- WEB FUNCTIONS IN THE MACHINE
- ABOUT THE WEB PAGES
- ABOUT THE WEB PAGES (FOR USERS)
- CONFIGURING THE PRINTER CONDITION SETTINGS
- ABOUT THE WEB PAGES (FOR THE ADMINISTRATOR)
- CONFIGURING SMTP AND DNS SERVER SETTINGS
- PROTECTING INFORMATION PROGRAMMED IN THE WEB PAGE ([Passwords])
- ADMINISTRATOR SETTINGS
- E-MAIL STATUS AND E-MAIL ALERT SETTINGS
- TRADEMARK ACKNOWLEDGMENTS
87
SYSTEM SETTINGS
USING THE SYSTEM SETTINGS
1
Press the [SPECIAL FUNCTION] key ( ).
2
Select "System Settings" with the [ ] or [ ] key and press the [OK] key.
3
Enter the administrator password with the numeric keys.
• " " appears for each digit that you enter.
• The mode selection screen appears.
4
Select the desired mode with the [ ] or [ ] key.
5
Press the [OK] key.
6
Select the desired setting with the [ ] or [ ] key.
7
Press the [OK] key and follow the instructions in the setting screen.
Several settings will have checkboxes in front of them. To enable a function (make a checkmark appear), press
the [OK] key. To disable the setting, press the [OK] once again to remove the checkmark. To configure a
setting that has a checkbox, go to step 8.
8
To use another setting for the same mode, select the desired setting with the [ ] or
[ ] key.
To use a setting for a different mode, press the [BACK] key ( ) and select the desired mode. To exit the
system settings, press the [HOME] key ( ).