Setup guide

22
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
WHEN THE MACHINE WILL BE
CONNECTED WITH A USB CABLE
Supported operating systems: Windows 98/Me/2000
*
/XP
*
/Server 2003
*
/
Vista
*
/Server 2008
*
* Administrator's rights are required to install the software.
When the software selection screen appears in step 6 of "OPENING THE
SOFTWARE SELECTION SCREEN (FOR ALL SOFTWARE)" (page 8),
perform the steps below.
1
Click the [Printer Driver] button.
• Make sure that a USB cable is not connected to your computer and the
machine.
If a cable is connected, a Plug and Play window will appear. If this happens,
click the [Cancel] button to close the window and disconnect the cable.
• If you are using the MX-C310/C380/C400, the PS3 expansion kit is required
to use the PS printer driver or the PPD driver.
• To install the PPD driver when Windows 98/Me is used, see "USING THE
STANDARD WINDOWS PS PRINTER DRIVER (Windows 98/Me/NT 4.0)"
(page 33) and install the driver using the Add Printer Wizard.
• To use the port created when the printer driver is installed for fax data
transfer, install the printer driver first and then install the PC-Fax driver.
!mxc381_ex_ins.book 22 ページ ２００８年１０月２１日 火曜日 午後７時２分