Setup guide

65
WHEN INSTALLATION WAS NOT SUCCESSFUL
The
machine is
not
detected
(when
connected
to a
network).
Is the IP address of the
machine configured?
If the IP address of the machine is not
configured, the machine will not be
detected. Make sure that the IP
address is configured correctly in
"Network Settings" in the machine's
system settings (administrator).
➞ System Settings (Administrator) >
"Network Settings"
Is your computer
connected to the same
network as the
machine?
Windows:
If the machine and your computer
are not connected to the same local
area network, the machine will not
be detected. If the two are
connected to different sub-networks,
click the [Specify condition] button
and enter the machine's name (host
name) or IP address to search for
the machine.
Macintosh:
If multiple AppleTalk zones exist,
select the zone to which the
machine is connected from the
menu.
Is the machine power
on?
If the machine is powered off, it will not
be detected. Switch on the main power
switch and the [POWER] key ( ) in
that order. (In Windows, search again
after powering on the machine.)
Is your computer
connected correctly to
the machine?
Make sure that the cable is connected
securely to the LAN connectors on
your computer and the machine.
Check the connections at the hub as
well.
☞ CONNECTING TO A NETWORK
(page 7)
Problem Point to check Solution
!mxc381_ex_ins.book 65 ページ ２００８年１０月２１日 火曜日 午後７時２分