mxc400p_us_saf.book -1 ページ ２００９年１０月５日 月曜日 午後１時５３分 MODEL: MX-C400P MX-C400P DIGITAL FULL COLOR PRINTER Safety Guide Safety Guide Please read first Please read this guide first to ensure safe use of the machine. Before installing this product, be sure to read the "TO ENSURE SAFE USE OF THE MACHINE" and "INSTALLATION REQUIREMENTS" sections.
mxc400p_us_saf.book 0 ページ ２００９年１０月５日 月曜日 午後１時５３分 Each instruction also covers the optional units used with these products. Caution! For complete electrical disconnection, pull out the main plug. The socket-outlet should be installed near the equipment and should be easily accessible. FOR YOUR RECORDS ... To protect against loss or theft, record and retain for reference the machine's serial number located at the lower left corner of the left side of the machine.
mxc400p_us_saf_01.fm 1 ページ ２００９年１０月１２日 月曜日 午前８時２５分 Contents CAUTIONS . . . . . . . . . . . . . . . . . 3 Laser information . . . . . . . . . . . . 8 INSTALLATION REQUIREMENTS . . . 9 SUPPLIES. . . . . . . . . . . . . . . . . 11 Storage of supplies. . . . . . . . . . 11 Supply of spare parts and consumables . . . . . . . . . . . . . . 11 SPECIFICATIONS . . . . . . . . . . 12 Machine specifications . . . . . . . 12 Continuous printing speeds . . . 16 Ambient environment . . . . . . . .
mxc400p_us_saf.book 2 ページ ２００９年１０月５日 月曜日 午後１時５３分 Note: • Considerable care has been taken in preparing this manual. If you have any comments or concerns about the manual, please contact your dealer or nearest SHARP Service Department. • This product has undergone strict quality control and inspection procedures. In the unlikely event that a defect or other problem is discovered, please contact your dealer or nearest SHARP Service Department.
mxc400p_us_saf_01.fm 3 ページ ２００９年１０月１４日 水曜日 午後１時３７分 CAUTIONS Symbols in this manual To ensure safe use of the machine, this manual uses various safety symbols. The safety symbols are classified as explained below. Be sure you understand the meaning of the symbols when reading the manual. WARNING Indicates a risk of death or serious injury. CAUTION Indicates a risk of human injury or property damage. Meaning of the symbols The symbol indicates the need for caution.
mxc400p_us_saf.book 4 ページ ２００９年１０月５日 月曜日 午後１時５３分 CAUTIONS WARNING Do not make any modifications to this machine. Doing so may result in personal injury or damage to the machine. If you notice smoke, a strange odor, or other abnormality, do not use the machine. If used in this condition, fire or electrical shock may result. Immediately switch off the main power and remove the power plug from the power outlet. Contact your dealer or nearest SHARP Service Department.
mxc400p_us_saf_01.fm 5 ページ ２００９年１０月９日 金曜日 午前１０時４３分 CAUTIONS CAUTION Do not install the machine on an unstable or slanted surface. Install the machine on a surface that can withstand the weight of the machine. There is a risk of injury due to the machine falling or toppling. If peripheral devices are to be installed, do not install on an uneven floor, slanted surface, or otherwise unstable surface. There is a danger of slippage, falling, and toppling.
mxc400p_us_saf.book 6 ページ ２００９年１０月５日 月曜日 午後１時５３分 CAUTIONS CAUTION The fusing unit is hot. When removing a misfeed, do not touch the fusing unit. Take care not to burn yourself. Fusing unit When loading paper, removing a misfeed, performing maintenance, closing the front and side covers, and inserting and removing trays, take care that your fingers are not pinched. If you will not use the machine for a long time, be sure to remove the power plug from the outlet for safety.
mxc400p_us_saf.book 7 ページ ２００９年１０月５日 月曜日 午後１時５３分 CAUTIONS The machine includes the print hold function, which stores document image data on the machine's hard drive. Stored documents can be called up and printed as needed. If a hard drive failure occurs, it will no longer be possible to call up the stored document data. To prevent the loss of important documents in the unlikely event of a hard drive failure, store the original data elsewhere.
mxc400p_us_saf.book 8 ページ ２００９年１０月５日 月曜日 午後１時５３分 CAUTIONS Laser information Wave length 790 nm ± 10 nm Pulse times (North America and Europe) 4.1 µs ± 4.1 ns / 7 mm Output power Max 0.6 mW (LD1+ LD2) Caution Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This Digital Equipment is CLASS 1 LASER PRODUCT (IEC 60825-1 Edition 1.
mxc400p_us_saf_01.fm 9 ページ ２００９年１０月５日 月曜日 午後８時１０分 INSTALLATION REQUIREMENTS The performance of the machine is affected by the ambient conditions of the installation location. Do not install in the following locations: CAUTION: Do not install the machine in a location with poor air circulation. A small amount of ozone is created inside the machine during printing.
mxc400p_us_saf.book 10 ページ ２００９年１０月５日 月曜日 午後１時５３分 INSTALLATION REQUIREMENTS Dusty locations Locations with ammonia gas If dust enters the machine, dirty output and machine failure may result. Installing the machine next to a diazo copy machine may cause dirty output. Locations exposed to direct sunlight Locations subject to vibration. Plastic parts may become deformed and dirty output may result. Vibration may cause failure. The machine includes a built-in hard drive.
mxc400p_us_saf.book 11 ページ ２００９年１０月５日 月曜日 午後１時５３分 SUPPLIES Standard supplies for this product that can be replaced by the user include paper, toner cartridges, and staple cartridges for the finisher. Be sure to use only SHARP-specified products for the toner cartridges, finisher staple cartridge, and transparency film. For best printing results, be sure to use only Sharp Genuine Supplies which are designed, engineered, and tested to maximize the life and performance of Sharp products.
mxc400p_us_saf.book 12 ページ ２００９年１０月５日 月曜日 午後１時５３分 SPECIFICATIONS Machine specifications Name Digital Full Color Printer MX-C400P Type Desktop Display 4.
mxc400p_us_saf_02.fm 13 ページ ２００９年１０月９日 金曜日 午後２時４９分 SPECIFICATIONS Machine specifications (Continued) Warm-up time 90 seconds or less (This may vary depending on the ambient conditions.) First-print time* Color print time: 8.9 seconds or less Black and white print time: 8.0 seconds or less (Portrait feeding of 8-1/2" x 11" (A4) sheets may vary depending on the state of the machine.
mxc400p_us_saf.book 14 ページ ２００９年１０月５日 月曜日 午後１時５３分 SPECIFICATIONS Machine specifications (Continued) Duplex module Paper sizes: 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 5-1/2" x 8-1/2", A4, B5, A5, 16K Paper weight: Plain paper (16 lbs. to 28 lbs.
mxc400p_us_saf_02.fm 15 ページ ２００９年１０月９日 金曜日 午前１０時３０分 SPECIFICATIONS Machine specifications (Continued) Required power supply AC 120 V ±10% 60 Hz Power consumption 1.44 kW Dimensions 22-3/64" (W) x 17-1/4" (D) x 24-1/64" (H) (560 mm (W) x 438 mm (D) x 610 mm (H)) Weight Approx. 97.0 lbs.
mxc400p_us_saf.book 16 ページ ２００９年１０月５日 月曜日 午後１時５３分 SPECIFICATIONS Continuous printing speeds* Print ratio 100% / Reduced / Enlarged Print mode Color B/W 8-1/2" x 11", 7-1/2" x 10"-1/2" 40 pages/min. 40 pages/min. A4, B5, 16K 38 pages/min. 38 pages/min. * Print speed during output of the second print and following prints when performing continuous one-sided printing of the same page (excluding offset output) using plain one-sided paper from a tray other than the bypass tray.
mxc400p_us_saf_02.fm 17 ページ ２００９年１０月７日 水曜日 午後１時４６分 SPECIFICATIONS Acoustic noise emission (measurement according to ISO7779) Sound power level LwA Printing mode (continuous printing) Color: 6.8 B B/W: 6.7 B Standby mode 4.
mxc400p_us_saf.book 18 ページ ２００９年１０月５日 月曜日 午後１時５３分 SPECIFICATIONS 500-sheet paper feed unit specifications Model MX-CSX1 (tray 2) Paper sizes 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 7-1/4" x 10-1/2", 5-1/2" x 8-1/2"*, A4, B5, A5*, 16K Paper weight Plain paper (16 lbs. to 28 lbs. (60 g/m2 to 105 g/m2)) Paper capacity 500 sheets (21 lbs.
mxc400p_us_saf.book 19 ページ ２００９年１０月５日 月曜日 午後１時５３分 SPECIFICATIONS Finisher specifications Model MX-FN12 Paper sizes 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 7-1/4" x 10-1/2", 5-1/2" x 8-1/2", envelopes, A4, B5, A5, 16K Paper weight Thin paper (15 lbs. to 16 lbs. (55 g/m2 to 59 g/m2)) plain paper (16 lbs. to 28 lbs. (60 g/m2 to 105 g/m2)) heavy paper (28 lbs. bond to 110 lbs.
mxc400p_us_saf.book 20 ページ ２００９年１０月５日 月曜日 午後１時５３分 SPECIFICATIONS Finisher specifications (Continued) Maximum number of sheets for stapling*3 30 sheets *1 The maximum number of sheets that can be held varies depending on ambient conditions in the installation location, the type of paper, and the storage conditions of the paper. *2 Up to 20 envelopes can be output. *3 The maximum number of sheets for stapling assumes a paper weight of 24 lbs. (90 g/m2) and includes two cover sheets of 28 lbs.
21 ページ ２００９年１０月５日 月曜日 午後１時５３分 Information that the administrator of the machine requires is printed on the back of this page. (Separate this page from the manual and keep it in a safe place. In addition, fill in the name of the administrator and the administrator's contact information in the left hand margin.) Administrator Name: ✂ Contact at: mxc400p_us_saf.
mxc400p_us_saf.book 22 ページ ２００９年１０月５日 月曜日 午後１時５３分 TO THE ADMINISTRATOR OF THE MACHINE (Separate this page from the manual and keep it in a safe place.) Factory default passwords When accessing the system settings, the administrator password is required to log in with administrator rights. The system settings can be configured in the Web pages as well as on the operation panel. To access the system settings using the Web pages, a password is also required.
mxc400p_us_saf.book 23 ページ ２００９年１０月５日 月曜日 午後１時５３分 TO THE ADMINISTRATOR OF THE MACHINE NOTICE for users in the USA BE SURE TO ASK YOUR AUTHORIZED SHARP DEALER ABOUT THE WARRANTY THAT YOUR SELLING DEALER EXTENDS TO YOU.
mxc400p_us_saf.book 24 ページ ２００９年１０月５日 月曜日 午後１時５３分 TO THE ADMINISTRATOR OF THE MACHINE Trademark acknowledgments The following trademarks and registered trademarks are used in conjunction with the machine and its peripheral devices and accessories. • Microsoft®, Windows®, Windows® 98, Windows® Me, Windows NT® 4.
mxc400p_us_saf.
mxc400p_us_saf_02.fm 26 ページ ２００９年１０月５日 月曜日 午後８時１０分 MX-C400P DIGITAL Safety Guide Safe Please Please read use of the m Before insta read the "T MACHINE" REQUIREM SHARP ELECTRONICS CORPORATION 1 Sharp Plaza, Mahwah, New Jersey 07495-1163. www.sharpusa.com SHARP ELECTRONICS OF CANADA LTD. 335 Britannia Road East, Mississauga, Ontario, L4Z 1W9 PRINTED IN CHINA This manual has been printed using a vegetable-based soy oil ink to help protect the environment.
