Government Compliance

Page 11 of 16
Criteria
Supporting Features Remarks and explanations
(f) When products deliver voice output in a public
area, incremental volume control shall be provided
with output amplification up to a level of at least 65
dB. Where the ambient noise level of the environment
is above 45 dB, a volume gain of at least 20 dB
above the ambient level shall be user selectable. A
function shall be provided to automatically reset the
volume to the default level after every use.
Not Applicable No voice output will be delivered in a public area.
(g) Color coding shall not be used as the only means
of conveying information, indicating an action,
prompting a response, or distinguishing a visual
element.
Not Applicable
Color coding is not used without description.
(h) When a product permits a user to adjust color and
contrast settings, a range of color selections capable
of producing a variety of contrast levels shall be
provided.
Supports
Contrast levels can be adjusted.
(i) Products shall be designed to avoid causing the
screen to flicker with a frequency greater than 2 Hz
and lower than 55 Hz.
Supports
Conforms
[For Touch Panel]
(j) Products which are freestanding, non-portable, and
intended to be used in one location and which have
operable controls shall comply with the following:
(j)-(1)The position of any operable control shall be
determined with respect to a vertical plane, which is
48 inches in length, centered on the operable control,
and at the maximum protrusion of the product within
the 48 inch length (see Figure 1 of this part).
Supports Applicable
(j)-(2)Where any operable control is 10 inches or
less behind the reference plane, the height shall be
54 inches maximum and 15 inches minimum above
the floor.
Supports
Applicable.
Operable control is 5 inches behind the reference
plane.
The height is 37 inches above the floor.
Platen cover also meets the requirement in (j)-2
because it can be stopped at any position.
(j)-(3) Where any operable control is more than 10
inches and not more than 24 inches behind the
reference plane, the height shall be 46 inches
maximum and 15 inches minimum above the floor.
Supports
(j)-(4)Operable controls shall not be more than 24
inches behind the reference plane (see Figure 2 of
this part).
Supports
Return to the top of the page.