Owner's Manual

7-33
SYSTEM SETTINGS
Contents
*1 When a saddle stitch finisher is installed.
*2 When a finisher (large stacker) is installed.
*3 When a large capacity tray is installed.
*4 When a stand/1 x 500 sheet paper drawer / stand/2 x 500 sheet paper drawer is installed.
*5 When a saddle stitch finisher or finisher is installed.
*6 When a punch module is installed.
Copy Function Settings
X Disabling of Finisher*
5
Disabled 7-68
X Disabling of Offset Disabled 7-68
X Disabling of Stapler*
5
Disabled 7-68
X Disabling of Punch*
6
Disabled 7-68
● Fusing Control Settings 16 - 23 lbs. (60 - 89g/m
2
) 7-68
Item Factory default setting Page
■ Copy Function Settings
7-69
● Initial Status Settings
7-69
X Paper Tray Varies depending on the machine
configuration
X Exposure Type Auto
X Copy Ratio 100%
X 2-Sided Copy 1-Side to 1-Side
X Output –
● Other Settings 7-70
X Copy Exposure Adjustment 5 7-70
X Rotation Copy Setting Enabled 7-70
X Add or Change Extra Preset Ratios – 7-70
X Setting a Maximum Number of Copies 999 7-70
X Initial Margin Shift Setting
7-70 Side 1 1/2"
 Side 2 1/2"
X Erase Width Adjustment
7-70 Edge Clearance Width 1/2"
 Center Clearance Width 1/2"
X Card Shot Settings
7-70 Original Size X: 3-3/8", Y: 2-1/8"
 Fit to Page Disabled
X Automatic Saddle Stitch* Enabled 7-70
X Initial Tab Copy Setting 1/2" 7-70
X Disabling Deletion of Job Programs Disabled 7-71
Item Factory default setting Page