Owner's Manual

7-35
SYSTEM SETTINGS
Contents
Printer Settings
Image Send Settings
Item Factory default setting Page
■ Printer Settings
7-73
● Default Settings 7-73
X Prohibit Notice Page Printing Enabled 7-73
X Prohibit Test Page Printing Disabled 7-73
X A4/Letter Size Auto Change Disabled 7-73
X Print Density Level 3 7-73
X Bypass Tray Settings 7-73
 Enable Detected Paper Size in Bypass Tray Disabled 7-73
 Enable Selected Paper Type in Bypass Tray Enabled 7-73
 Exclude Bypass-Tray from Auto Paper Select Disabled 7-73
X Job Spool Queuing Enabled 7-73
X Disabling of USB Memory Direct Print Disabled 7-73
X Disabling of Network Folder Direct Print Disabled 7-73
● Interface Settings 7-74
X Hexadecimal Dump Mode Disabled 7-74
X I/O Timeout 60 sec. 7-74
X Enable USB Port Enabled 7-74
X USB Port Emulation Switching Auto 7-74
X Enable Network Port Enabled 7-74
X Network Port Emulation Switching Auto 7-74
X Port Switching Method Switch at End of Job 7-74
Item Factory default setting Page
■ Image Send Settings
7-75
● Operation Settings 7-75
X Other Settings 7-75
 Default Display Settings Scan (fax when fax is installed)
7-75
• Hold settings for a while after scanning has been
completed
Disabled
 Address Book Default Selection Tab Switch: ABC, Address Type: All 7-75