MX-2300G/N/2700G/N Operation-Manual Quick-Start-Guide GB
Table Of Contents
- MANUALS PROVIDED WITH THE MACHINE
- ACCESSING THE WEB SERVER IN THE MACHINE
- TABLE OF CONTENTS
- PART NAMES AND FUNCTIONS
- OPERATION PANEL
- USING THE TOUCH PANEL
- USER AUTHENTICATION
- PLACING ORIGINALS
- CHANGING PAPER IN A TRAY
- MAKING COPIES
- 2-SIDED COPYING (Automatic Document Feeder)
- COPYING ON SPECIAL PAPER (Bypass Copy)
- SELECTING THE EXPOSURE MODE
- FITTING THE COPY IMAGE TO THE PAPER (Automatic Ratio Selection)
- ENLARGEMENT/REDUCTION (Preset Ratios / Zoom)
- INTERRUPTING A COPY RUN (Interrupt Copy)
- STORING COPY OPERATIONS (Job Programs)
- SPECIAL MODES
- SELECTING A SPECIAL MODE
- CONVENIENT COPY FUNCTIONS
- Adding margins (Margin Shift)
- Erasing peripheral shadows (Erase)
- Copying each facing page of a bound document (Dual Page Copy)
- Making copies in pamphlet format (Pamphlet Copy)
- Copying a large number of originals at once (Job Build)
- Using two machines to copy a large number of originals (Tandem Copy)
- Using a different paper type for covers (Covers/Inserts)
- Adding inserts when copying on transparency film (Transparency Inserts)
- Copying multiple pages onto one sheet of paper (Multi Shot)
- Copying a pamphlet (Book Copy)
- Copying captions onto tab paper (Tab Copy)
- Copying both sides of a card onto one sheet of paper (Card Shot)
- Printing the date or a stamp on copies (Stamp)
- Repeating photos on a copy (Photo Repeat)
- Creating a large poster (Multi-Page Enlargement)
- Inverting the image (Mirror Image)
- Copying an A3 size original without cutting off the edges (A3 Full Bleed)
- Copying in the centre of the paper (Centring)
- Reversing white and black in a copy (B/W Reverse)
- Adjusting red/green/blue in copies (RGB Adjust)
- Adjusting the sharpness of an image (Sharpness)
- Whitening faint colours in copies (Suppress Background)
- Adjusting the colour (Colour Balance)
- Adjusting the brightness of a copy (Brightness)
- Adjusting the intensity of a copy (Intensity)
- Checking copies before printing (Proof Copy)
- Copying originals that are different sizes (Mixed Size Original)
- Copying thin originals (Slow Scan Mode)
- PRINTING
- CANCELLING A PRINT JOB
- USING PRINTER DRIVER HELP
- PRINTER DRIVERS
- SELECTING PRINTER DRIVER SETTINGS
- CONVENIENT PRINTER FUNCTIONS
- 2-sided printing (Document Style)
- Fitting the print image to the paper (Fit To Paper Size)
- Printing multiple images on one sheet of paper (N-Up Printing)
- Stapling printed pages (Staple)
- Punching holes in output (Punch)
- Printing a colour image in greyscale (Black and White Print)
- The machine also has these functions
- PRINTING FROM A MACINTOSH
- NETWORK SCANNER FUNCTION
- SCANNING AN ORIGINAL
- CHANGING THE RESOLUTION
- SELECTING THE EXPOSURE AND EXPOSURE MODE
- CHANGING THE FILE FORMAT
- STORING A DESTINATION
- SENDING THE SAME IMAGE TO MULTIPLE DESTINATIONS (Broadcast Transmission)
- CONVENIENT TRANSMISSION METHODS
- SPECIAL SCAN MODES
- SELECTING SPECIAL MODES FOR THE SCANNER FUNCTION
- CONVENIENT SCANNER FUNCTIONS
- Erasing peripheral shadows (Erase)
- Scanning the left and right pages of a bound document as two separate pages (Dual Page Scan)
- Whitening faint colours (Suppress Background)
- Scanning both sides of a card onto a single page (Card Shot)
- Sending a large number of pages (Job Build)
- Sending two original pages as a single page (2in1)
- The machine also has these functions
- DOCUMENT FILING
- QUICKLY SAVING DOCUMENT DATA (Quick File)
- APPENDING INFORMATION WHEN STORING A FILE (File)
- ONLY SAVING DOCUMENT DATA (Scan to HDD)
- PRINTING A SAVED FILE
- SYSTEM SETTINGS
34
SELECTING A SPECIAL MODE
The procedure for selecting settings for a special mode is explained below. The settings that must be selected
vary for each special mode, however, the general procedure is the same. The procedure for selecting settings for
"Adding margins (Margin Shift)" is explained below as an example.
1
Place the original.
When using the document glass, place the original
with the side to be scanned face down.
2
Select the desired special mode
(example: margin shift) settings in the
touch panel.
(1) Touch the [Special Modes] key.
(2) Touch the [Margin Shift] key.
Settings to shift the left margin by 15 mm will be
selected.
(3) Select 15 mm for the front side and
15 mm for the reverse side using the
keys.
(4) Touch the [OK] key.
The margin shift position is initially set to
"Right".
To change the position to "Left" or "Down",
touch the corresponding key.
3
Set the number of copies and then press
the [COLOUR START] key or the [BLACK
& WHITE START] key.
The side to be scanned must be face up!
Ready to scan for copy.
2-Sided Copy
0
Output
Special Modes
File
Quick File
Full Colour
Colour Mode
2.
3.
4.
1.
Auto
Exposure
100%
Copy Ratio
Job Detail
Settings
Special Modes
OK
1/4
Margin Shift
Pamphlet Copy
Erase
Tandem
Copy
Dual Page
Copy
Job
Build
Special Modes
OK
OKCancel
Margin Shift
Right Left Down
Side 1 Side 2
15 15
(0~20)
mm
(0~20)
mm
Original
A3
A4
B4
A4R
A4
Plain
A4
(1)
(2)
(3)
(4)
or
Cancel copying
Cancel scanning
Correct sets
mx2700exqck.book34ページ2005年9月20日 火曜日 午前9時46分