MX-2300G/N/2700G/N Operation-Manual Quick-Start-Guide GB
Table Of Contents
- MANUALS PROVIDED WITH THE MACHINE
- ACCESSING THE WEB SERVER IN THE MACHINE
- TABLE OF CONTENTS
- PART NAMES AND FUNCTIONS
- OPERATION PANEL
- USING THE TOUCH PANEL
- USER AUTHENTICATION
- PLACING ORIGINALS
- CHANGING PAPER IN A TRAY
- MAKING COPIES
- 2-SIDED COPYING (Automatic Document Feeder)
- COPYING ON SPECIAL PAPER (Bypass Copy)
- SELECTING THE EXPOSURE MODE
- FITTING THE COPY IMAGE TO THE PAPER (Automatic Ratio Selection)
- ENLARGEMENT/REDUCTION (Preset Ratios / Zoom)
- INTERRUPTING A COPY RUN (Interrupt Copy)
- STORING COPY OPERATIONS (Job Programs)
- SPECIAL MODES
- SELECTING A SPECIAL MODE
- CONVENIENT COPY FUNCTIONS
- Adding margins (Margin Shift)
- Erasing peripheral shadows (Erase)
- Copying each facing page of a bound document (Dual Page Copy)
- Making copies in pamphlet format (Pamphlet Copy)
- Copying a large number of originals at once (Job Build)
- Using two machines to copy a large number of originals (Tandem Copy)
- Using a different paper type for covers (Covers/Inserts)
- Adding inserts when copying on transparency film (Transparency Inserts)
- Copying multiple pages onto one sheet of paper (Multi Shot)
- Copying a pamphlet (Book Copy)
- Copying captions onto tab paper (Tab Copy)
- Copying both sides of a card onto one sheet of paper (Card Shot)
- Printing the date or a stamp on copies (Stamp)
- Repeating photos on a copy (Photo Repeat)
- Creating a large poster (Multi-Page Enlargement)
- Inverting the image (Mirror Image)
- Copying an A3 size original without cutting off the edges (A3 Full Bleed)
- Copying in the centre of the paper (Centring)
- Reversing white and black in a copy (B/W Reverse)
- Adjusting red/green/blue in copies (RGB Adjust)
- Adjusting the sharpness of an image (Sharpness)
- Whitening faint colours in copies (Suppress Background)
- Adjusting the colour (Colour Balance)
- Adjusting the brightness of a copy (Brightness)
- Adjusting the intensity of a copy (Intensity)
- Checking copies before printing (Proof Copy)
- Copying originals that are different sizes (Mixed Size Original)
- Copying thin originals (Slow Scan Mode)
- PRINTING
- CANCELLING A PRINT JOB
- USING PRINTER DRIVER HELP
- PRINTER DRIVERS
- SELECTING PRINTER DRIVER SETTINGS
- CONVENIENT PRINTER FUNCTIONS
- 2-sided printing (Document Style)
- Fitting the print image to the paper (Fit To Paper Size)
- Printing multiple images on one sheet of paper (N-Up Printing)
- Stapling printed pages (Staple)
- Punching holes in output (Punch)
- Printing a colour image in greyscale (Black and White Print)
- The machine also has these functions
- PRINTING FROM A MACINTOSH
- NETWORK SCANNER FUNCTION
- SCANNING AN ORIGINAL
- CHANGING THE RESOLUTION
- SELECTING THE EXPOSURE AND EXPOSURE MODE
- CHANGING THE FILE FORMAT
- STORING A DESTINATION
- SENDING THE SAME IMAGE TO MULTIPLE DESTINATIONS (Broadcast Transmission)
- CONVENIENT TRANSMISSION METHODS
- SPECIAL SCAN MODES
- SELECTING SPECIAL MODES FOR THE SCANNER FUNCTION
- CONVENIENT SCANNER FUNCTIONS
- Erasing peripheral shadows (Erase)
- Scanning the left and right pages of a bound document as two separate pages (Dual Page Scan)
- Whitening faint colours (Suppress Background)
- Scanning both sides of a card onto a single page (Card Shot)
- Sending a large number of pages (Job Build)
- Sending two original pages as a single page (2in1)
- The machine also has these functions
- DOCUMENT FILING
- QUICKLY SAVING DOCUMENT DATA (Quick File)
- APPENDING INFORMATION WHEN STORING A FILE (File)
- ONLY SAVING DOCUMENT DATA (Scan to HDD)
- PRINTING A SAVED FILE
- SYSTEM SETTINGS
48
PRINTER DRIVERS
When using the printer function of the machine, you can configure a variety of settings in the printer driver
properties window. This section introduces the types of printer drivers and the printer driver settings.
Printer driver types
PCL printer driver (provided standard with the MX-2300N/MX-2700N)
The machine supports the Hewlett-Packard PCL6 and PCL5c printer control languages. It is recommended that
you use the PCL6 printer driver. If you have a problem printing from older software using the PCL6 printer driver,
use the PCL5c printer driver.
SPLC-c printer driver (provided standard with the MX-2300G/MX-2700G)
This is the SHARP proprietary printer driver that is provided standard with the machine. The printer driver
compresses the data in each print job before sending the job to the machine, enabling smooth printing.
PS printer driver (for use when the PS3 expansion kit is installed)
This printer driver supports the PostScript 3 page description language developed by Adobe Systems
Incorporated and enables the machine to be used as a PostScript 3 compatible printer.
For detailed information on using the drivers, see "PRINTER FUNCTION OF THE MACHINE" in the Printer
Guide.
Printer driver settings
The settings that can be selected in the printer driver are grouped on six tabs. Click on a tab to bring it to the front.
The settings on each tab are shown below.
Note that there are additional settings that are not shown below. For explanations of the other settings, see printer
driver Help.
Main tab
• Document Style
• N-Up Printing
•Staple
• Punch
• Black and White Print
• Pamphlet style / Pamphlet staple
• Margin Shift
• Rotate 180 degrees
Advanced tab
• Mirror Image (PS only)
• Overlays (PCL5c, PCL6, PS)
• Tab Paper Settings
(PCL5c, PCL6, PS)
• Tandem Print
(PCL5c, PCL6, PS)
Watermarks tab
• Watermark
• Image Stamp
(PCL6, SPLC-c, PS)
Paper Tab
•Fit To Paper Size
• Poster Printing
(PCL6, SPLC-c, PS)
• Zoom / XY-Zoom
• Different Paper
• Transparency Inserts
• Carbon Copy (PCL5c, PCL6, PS)
• Tab Paper Print (PCL6 only)
Job Handling tab
• Retention
• Document Filing Settings
Colour tab
• Colour Adjustment
• Text To Black/Vector To Black
• Image Type
mx2700exqck.book48ページ2005年9月20日 火曜日 午前9時46分