MX-FXX1 Operation-Manual GB
Table Of Contents
- TABLE OF CONTENTS
- ABOUT THIS MANUAL
- BEFORE USING FAX MODE
- BASIC TRANSMISSION METHODS
- TRANSMISSION METHODS
- USING THE AUTOMATIC DOCUMENT FEEDER FOR TRANSMISSION
- USING THE DOCUMENT GLASS FOR TRANSMISSION
- TRANSMISSION BY REDIALLING (RESEND)
- TRANSMISSION USING THE SPEAKER
- CHANGING THE RESOLUTION AND EXPOSURE
- SPECIFYING THE ORIGINAL SCAN SIZE AND SEND SIZE (Enlarge/Reduce Sending)
- AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL (2-sided original)
- ENTERING DESTINATION FAX NUMBERS
- FAX RECEPTION
- CHECKING THE STATUS OF FAX JOBS
- PRINTING A TRANSACTION REPORT / IMAGE SENDING ACTIVITY REPORT
- CONVENIENT FUNCTIONS
- SENDING THE SAME FAX TO MULTIPLE DESTINATIONS (Broadcast transmission)
- SENDING A FAX AT A SPECIFIED TIME (Timer)
- ERASING PERIPHERAL SHADOWS ON THE IMAGE (Erase)
- TRANSMITTING AN ORIGINAL AS TWO SEPARATE PAGES (Dual Page Scan)
- SENDING TWO PAGES AS A SINGLE PAGE (2in1)
- SENDING BOTH SIDES OF A CARD AS A SINGLE PAGE (Card Shot)
- STORING FAX OPERATIONS (Program)
- ADDING YOUR SENDER INFORMATION TO FAXES (Own number sending)
- TRANSMITTING ORIGINALS OF DIFFERENT SIZES (Mixed Size Original)
- FAXING THIN ORIGINALS (Slow Scan Mode)
- SENDING A LARGE NUMBER OF PAGES (Job Build)
- CALLING A FAX MACHINE AND INITIATING RECEPTION (Polling)
- SENDING A FAX WHEN ANOTHER MACHINE POLLS YOUR MACHINE (Polling memory)
- FORWARDING RECEIVED FAXES (Fax Data Forward)
- SENDING A FAX DIRECTLY FROM A COMPUTER (PC-Fax)
- FORWARDING A RECEIVED FAX TO AN E-MAIL ADDRESS (Inbound Routing Settings)
- PERFORMING F-CODE COMMUNICATION
- USING AN EXTENSION PHONE
- IF THE MACHINE IS MOVED
- SYSTEM SETTINGS FOR FAX
- System Settings
- Accessing the System Settings (General)
- System Settings (General) List
- List Print (User)
- Address Control
- Storing a One-touch (Individual) Key for Fax
- Storing a Group Key
- Storing a Program
- Amend/Delete a One-touch Key or Program
- Programming an F-code Memory Box (Polling Memory)
- Programming an F-code Memory Box (Confidential)
- Programming an F-code Memory Box (Relay Broadcast)
- Editing and Deleting F-code Memory Boxes
- Changing the Name of a Custom Index
- Fax Data Receive/Forward
- Accessing the System Settings (Administrator)
- System Settings (Administrator) List
- Operation Settings
- Device Control
- Image Send Settings
- List Print (Administrator)
- Enable/Disable Settings
106
CREATING MEMORY BOXES IN THE MACHINE FOR
F-CODE COMMUNICATION
Before the F-code communication function can be used, special memory boxes must be created using "F-Code Memory
Box" in the system settings for fax.
A box name and F-code (sub-address and passcode) are programmed in each box, and an F-code communication
function is assigned to each box.
After you have created a memory box, inform the other party of the sub-address and passcode of the box.
To use the following F-code communication functions, F-code memory boxes must be created in your machine.
F-code confidential reception, F-code polling memory, F-code relay broadcast transmission
To use the following F-code communication functions, F-code memory boxes must be created in the other machine.
F-code confidential transmission, F-code polling reception, F-code relay request transmission.
System Settings for Fax: F-Code Memory Box
This is used to configure memory boxes for F-code communication.
• Up to 100 memory boxes can be created.
• The memory box name cannot be longer than 18 characters, and the sub-address and passcode cannot be longer than 20
digits.
☞ Programming an F-code Memory Box (Polling Memory) (page 150), Programming an F-code Memory Box
(Confidential) (page 152), Programming an F-code Memory Box (Relay Broadcast) (page 155)
• Memory box name
• Sub-address
• Passcode
• End receiving machines (only in an F-code relay
broadcast memory box)
• Print PIN (only for F-code confidential reception)
Memory box for F-code
communication