MX-FXX1 Operation-Manual GB
Table Of Contents
- TABLE OF CONTENTS
- ABOUT THIS MANUAL
- BEFORE USING FAX MODE
- BASIC TRANSMISSION METHODS
- TRANSMISSION METHODS
- USING THE AUTOMATIC DOCUMENT FEEDER FOR TRANSMISSION
- USING THE DOCUMENT GLASS FOR TRANSMISSION
- TRANSMISSION BY REDIALLING (RESEND)
- TRANSMISSION USING THE SPEAKER
- CHANGING THE RESOLUTION AND EXPOSURE
- SPECIFYING THE ORIGINAL SCAN SIZE AND SEND SIZE (Enlarge/Reduce Sending)
- AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL (2-sided original)
- ENTERING DESTINATION FAX NUMBERS
- FAX RECEPTION
- CHECKING THE STATUS OF FAX JOBS
- PRINTING A TRANSACTION REPORT / IMAGE SENDING ACTIVITY REPORT
- CONVENIENT FUNCTIONS
- SENDING THE SAME FAX TO MULTIPLE DESTINATIONS (Broadcast transmission)
- SENDING A FAX AT A SPECIFIED TIME (Timer)
- ERASING PERIPHERAL SHADOWS ON THE IMAGE (Erase)
- TRANSMITTING AN ORIGINAL AS TWO SEPARATE PAGES (Dual Page Scan)
- SENDING TWO PAGES AS A SINGLE PAGE (2in1)
- SENDING BOTH SIDES OF A CARD AS A SINGLE PAGE (Card Shot)
- STORING FAX OPERATIONS (Program)
- ADDING YOUR SENDER INFORMATION TO FAXES (Own number sending)
- TRANSMITTING ORIGINALS OF DIFFERENT SIZES (Mixed Size Original)
- FAXING THIN ORIGINALS (Slow Scan Mode)
- SENDING A LARGE NUMBER OF PAGES (Job Build)
- CALLING A FAX MACHINE AND INITIATING RECEPTION (Polling)
- SENDING A FAX WHEN ANOTHER MACHINE POLLS YOUR MACHINE (Polling memory)
- FORWARDING RECEIVED FAXES (Fax Data Forward)
- SENDING A FAX DIRECTLY FROM A COMPUTER (PC-Fax)
- FORWARDING A RECEIVED FAX TO AN E-MAIL ADDRESS (Inbound Routing Settings)
- PERFORMING F-CODE COMMUNICATION
- USING AN EXTENSION PHONE
- IF THE MACHINE IS MOVED
- SYSTEM SETTINGS FOR FAX
- System Settings
- Accessing the System Settings (General)
- System Settings (General) List
- List Print (User)
- Address Control
- Storing a One-touch (Individual) Key for Fax
- Storing a Group Key
- Storing a Program
- Amend/Delete a One-touch Key or Program
- Programming an F-code Memory Box (Polling Memory)
- Programming an F-code Memory Box (Confidential)
- Programming an F-code Memory Box (Relay Broadcast)
- Editing and Deleting F-code Memory Boxes
- Changing the Name of a Custom Index
- Fax Data Receive/Forward
- Accessing the System Settings (Administrator)
- System Settings (Administrator) List
- Operation Settings
- Device Control
- Image Send Settings
- List Print (Administrator)
- Enable/Disable Settings
187
Fax Polling Security
The following settings are for regular polling memory using the Public Box.
Touch the [Image Send Settings] key, the [Fax Settings] key, and then the [Fax Polling Security] key to configure the
settings.
Polling Security Setting
When the memory polling function is used, this setting
determines whether any machine will be allowed to poll
your machine, or only machines that have been
specified in your machine.
To enable this setting, select the checkbox and
touch the [OK] key.
Passcode Number Setting
When the Polling Security Setting is enabled (see
above), use this setting to store (or delete) the fax
numbers of the machines that are allowed to poll your
machine. The stored fax numbers are called passcode
numbers. Up to 10 passcode numbers can be stored.
1
Touch the [Enter] key.
2
Touch a key that has no number stored
(a blank key).
If numbers have been stored in all of the keys, a message
will appear and no further numbers can be stored. First
delete a number that is no longer needed and then store
the new number.
3
Press the numeric keys to store the fax
number.
Up to 20 digits can be entered.
To enter a hyphen, touch the [Pause] key. To enter a
space, touch the [Space] key. To enter "+", press the
" " key.
If you make a mistake, press the [CLEAR] key ( ) and
re-enter the correct digits.
4
Touch the [OK] key.
Return to step 2.
To store another number, repeat steps 2 through 4.
5
Touch the [OK] key.
1
Touch the [Delete] key.
2
Touch the key of the number you wish to
delete.
3
Touch the [Yes] key.
Return to step 2.
To delete another number, repeat steps 2 and 3.
4
Touch the [OK] key.
Note that these settings do not apply to F-code polling memory.
If the Polling Security Setting is enabled, enter the
numbers of the fax machines that will be allowed to
poll your machine in "Passcode Number Setting"
below.
Storing passcode numbers
System Settings
Passcode Number Setting
Enter
OK
Cancel
1/2
Deleting a passcode number
System Settings
Passcode Number Setting
Delete
OK
Cancel
1/2
0123456789 0123456789