MX-FXX1 Operation-Manual GB
Table Of Contents
- TABLE OF CONTENTS
- ABOUT THIS MANUAL
- BEFORE USING FAX MODE
- BASIC TRANSMISSION METHODS
- TRANSMISSION METHODS
- USING THE AUTOMATIC DOCUMENT FEEDER FOR TRANSMISSION
- USING THE DOCUMENT GLASS FOR TRANSMISSION
- TRANSMISSION BY REDIALLING (RESEND)
- TRANSMISSION USING THE SPEAKER
- CHANGING THE RESOLUTION AND EXPOSURE
- SPECIFYING THE ORIGINAL SCAN SIZE AND SEND SIZE (Enlarge/Reduce Sending)
- AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL (2-sided original)
- ENTERING DESTINATION FAX NUMBERS
- FAX RECEPTION
- CHECKING THE STATUS OF FAX JOBS
- PRINTING A TRANSACTION REPORT / IMAGE SENDING ACTIVITY REPORT
- CONVENIENT FUNCTIONS
- SENDING THE SAME FAX TO MULTIPLE DESTINATIONS (Broadcast transmission)
- SENDING A FAX AT A SPECIFIED TIME (Timer)
- ERASING PERIPHERAL SHADOWS ON THE IMAGE (Erase)
- TRANSMITTING AN ORIGINAL AS TWO SEPARATE PAGES (Dual Page Scan)
- SENDING TWO PAGES AS A SINGLE PAGE (2in1)
- SENDING BOTH SIDES OF A CARD AS A SINGLE PAGE (Card Shot)
- STORING FAX OPERATIONS (Program)
- ADDING YOUR SENDER INFORMATION TO FAXES (Own number sending)
- TRANSMITTING ORIGINALS OF DIFFERENT SIZES (Mixed Size Original)
- FAXING THIN ORIGINALS (Slow Scan Mode)
- SENDING A LARGE NUMBER OF PAGES (Job Build)
- CALLING A FAX MACHINE AND INITIATING RECEPTION (Polling)
- SENDING A FAX WHEN ANOTHER MACHINE POLLS YOUR MACHINE (Polling memory)
- FORWARDING RECEIVED FAXES (Fax Data Forward)
- SENDING A FAX DIRECTLY FROM A COMPUTER (PC-Fax)
- FORWARDING A RECEIVED FAX TO AN E-MAIL ADDRESS (Inbound Routing Settings)
- PERFORMING F-CODE COMMUNICATION
- USING AN EXTENSION PHONE
- IF THE MACHINE IS MOVED
- SYSTEM SETTINGS FOR FAX
- System Settings
- Accessing the System Settings (General)
- System Settings (General) List
- List Print (User)
- Address Control
- Storing a One-touch (Individual) Key for Fax
- Storing a Group Key
- Storing a Program
- Amend/Delete a One-touch Key or Program
- Programming an F-code Memory Box (Polling Memory)
- Programming an F-code Memory Box (Confidential)
- Programming an F-code Memory Box (Relay Broadcast)
- Editing and Deleting F-code Memory Boxes
- Changing the Name of a Custom Index
- Fax Data Receive/Forward
- Accessing the System Settings (Administrator)
- System Settings (Administrator) List
- Operation Settings
- Device Control
- Image Send Settings
- List Print (Administrator)
- Enable/Disable Settings
48
This chapter explains how to check the status of reserved transmission jobs and received faxes.
JOB STATUS SCREEN
The job status screen is displayed when the [JOB STATUS] key on the operation panel is pressed. The job status
screen shows the status of jobs by mode. When the [JOB STATUS] key is pressed, the job status screen of the mode
that was being used before the key was pressed appears.
Example: Pressing the key in fax mode
Reserved transmissions and received faxes are referred to as jobs here.
5
CHECKING THE STATUS OF FAX
JOBS
The left edge of the job status screen appears at the left edge of the touch panel screen The left edge of the job status screen
can be touched to display the job status screen.
Address
Set Time Pages
Status
Job Queue
Complete
Detail
Priority
Stop/Delete
Internet Fax
Fax Job
Scan toPrint Job
Broadcast0002
AAA AAA
0312345678
Waiting
Waiting
Waiting
Broadcast0001
10:00 11/01 000/003
Connecting
10:05 11/01 000/001
10:08 11/01 000/004
10:30 11/01 000/010
1/1
JOB STATUS
Quick File
File
Special Modes
Sub Address
Speaker
Resend
Address Book
Fax
Mode Switch
Direct TX
Memory TX
Auto Reception
Ready to send.
Image
Settings
Fax Memory:100%