Operation Manual, Software Setup Guide

Search for the machine and install the driver

When you are asked how the printer is

connected, select [Search for MFP] and click the

[Next] button.

Refer to "Custom installation (page 7)" on how to display the

custom installation screen.

Select the search method.

Select the name of this machine (host name) or IP address,

then click the [Next] button.

• Configure port settings if needed. (Normally no changes

are needed.)

• If you will use the tandem print function, select [Yes].

(Printer driver only)

When the model selection window appears,

select the model name of your machine and

click the [Next] button.

You can also click the [Specify Condition] button and search

for the machine by entering the machine's name (host name)

or IP address, or selecting the search period.

Follow the instructions on the screen and

proceed with installation.

For detailed procedures, refer to Step 4 onwards of

"Installation by specifying the machine's address (page 8)".

This completes the installation.