Operation Manual, User's Manual

7-84
SETTING MODE►SYSTEM SETTINGS
Sound Settings
Configure machine notification sounds and their volume.
Beep Sound Settings (Common)
Keys Touch Sound
Control the key touch sound level, or turns the sound off.
Beep of Invalid Input
Control the volume of the sound, or turn the sound off at an invalid setting, such as when a number that cannot be
specified is entered.
Reference Tone
This turns the sound on when changing the copy ratio or exposure, and the setting reaches the standard value (copy
ratio 100%, exposure 3). Control the reference tone sound level, or turns the sound off.
Copy Complete Sound
Control the copy completed notification sound level, or turns the sound off.
Scan Complete Sound (Image Send)
Control the fax or scanner scanning completed notification sound level, or turns the sound off.
Powering Off Sound
Control the machine power off notification sound level, or turns the sound off.
Caution Sound Settings
Set whether to play a notification sound when the machine is in the following status.
Paper Empty, No Original, Jam, Toner Empty, Output Tray Full.
Beep Sound Settings (Image Send)
Adjust the sound volume of functions used in fax and scan operations.
Fax
Set the sound for the Speaker, Ringer Volume, Fax Receive Complete Signal, Fax Send Complete Signal, and Fax
Communication Error Signal.
Internet Fax
Adjust the Fax Communication Error Signal and Fax Receive Complete Signal speaker volume setting.