Operation Manual, User's Manual

2-47
COPIER►BASIC PROCEDURE FOR MAKING COPIES
Copy by automatically calculating the repeat count (Auto Repeat)
1
Place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
► AUT
OMATIC DOCUMENT FEEDER (page 1-111)
► DOCUMENT GLASS (page 1-113)
2
Tap the [Detail] key to change to normal mode.
► CHANGING MODES (page 1-12)
3
Tap the [Others] key, and then tap the [Repeat Layout] key.
4
Tap the [Auto Repeat] key.
5
Check the repeat faces which have
been calculated automatically.
Change the original size, paper size, or copy ratio by tapping
the respective [Original], [Paper Select], or [Copy Ratio] key
when necessary.
► SE
LECTING THE ORIENTATION AND SIZE OF THE
ORIGINAL (page 2-32)
► MANUAL RATIO SELECTION (page 2-26)
► SELECTING THE PAPER TRAY FOR COPYING (page
2-12)
Set so that there are one or more repeat faces.
6
Tap the [Layout] key.
Tap the [Layout w/o spacing] key and [Layout evenly
spaced] key to select the layout.
Off
CA
Preview
B/W
Start
Colour
Start
Colour Mode
Change Size/Direction.
Original
Back
Current Setting
No. of
Faces
Original
Paper Select
Copy Ratio
Auto Repeat
Fixed Repeat
Photo Repeat
Auto Layout of Repeat Face Based on Original, Paper Size and Ratio.
Repeat Layout
Others
Background Adjustment
Select Type/Exposure
Exposure
Layout w/o spacing
Layout
Parting Line
Off
CA
Others
Repeat Layout
Change Size/Direction.
Original
Colour Mode
Background Adjustment
Exposure
Select Type/Exposure
Preview
Layout
Select Image Layout
Layout w/o spacing
Layout evenly
B/W
Start
Colour
Start
Back
Fax
Scan
Repeat Layout
Layout
Select Image Layout
Layout w/o spacing
Layout evenly
Back
Fax
Scan
Repeat Layout
Layout
Select Image Layout
Layout w/o spacing
Layout evenly
spaced