Operation Manual, User's Manual

2-90
COPIER►OTHER FUNCTIONS
For settings related to custom stamp and custom water mark, see the following table.
For custom stamp
For custom watermark
5
Set [Print Page] or [Print Position].
After the settings are completed, tap and [Back] keys in
sequence.
• To cancel the custom image setting:
Tap the [Off] key.
• To cancel all settings:
Tap the [CA] key.
6
Tap the [Colour Start] or [B/W Start] key to start copying.
Print Page Specify a page(s) for stamp copy. First Page or All Pages
Print Position Specify a position for stamp copy.
Print Angle Specify the corner of the image. 0 degrees, -90 degrees, 90 degrees, or 180 degrees
Print Colour Specify the image watermark colour. Black, red, green, blue, cyan, magenta or yellow.
Print Pattern
Specify the image watermark print pattern.
Transparent: Makes an original image transparent for stamp copy.
Overlap: Hides a watermark added to an original image for stamp copy.
Exposure Select the exposure of a watermark from nine levels.
Print Page
Specify a page(s) for stamp copy.
First Page or All Pages
Print Position Specify a position for stamp copy.
Print Angle Specify the corner of the image. 0 degrees, -90 degrees, 90 degrees, or 180 degrees
Others
Custom Image
Select Image to Operate.
Preview
Start
Colour
Start
Off
Image
Print Page
Print Position
Print Angle
Custom
Stamp
Custom
Watermark
Original
Change Size/Direction.
Back
Print on cover/insert when
copy is made on cover/insert
0°
First Page
Not
X: 0 mm
Y: 0 mm
Print Date and Stamp
Stamp
Colour Mode
2-Sided Copy
Put Multiple Pages in A Page
N-Up
CA
B/W
(3)
(4)
(5)