Operation Manual, User's Manual

1-154
BEFORE USING THE MACHINE►PERIPHERAL DEVICES
Saddle stitch unit
When the staple cartridge runs out of staples, a message will appear in the operation panel. Follow the operation
procedure to replace the staple cartridge.
Before starting this procedure, remove all output from the output tray of the saddle stitch finisher (Large stacker).
Do not replace removed output back in the output tray.
6
Close the front cover.
Make a proof copy in staple sort function to verify that stapling takes place correctly.
1
Open the front cover.
2
Grasp the handle on the saddle stitch
unit and pull it slowly out until it stops.