Operation Manual, User's Manual

7-14
SETTING MODE►SETTING MODE LIST
Image Send Settings
Common Settings
U: General user; A: System administrator/Administrator
Setup Items Factory default setting U A Page
● Common Settings
 Condition Settings
 Hold settings for a while after scanning has been
completed
Disabled
No Yes
4-11
 Job Auto Start Time During Scanning 60sec. No Yes
 Default Display Setting E-mail (Fax when the
facsimile expansion kit
is installed)
No Yes
 Address Book Default Selection No Yes
4-12• Higher priority is given to the display of address book. Disabled No Yes
• Apply Addresses of Sending Modes Only Enabled No Yes
• Category Displayed as Default None No Yes
A
• Display all address type regardless of the mode
being displayed currently.
Disabled
No Yes
• Enlarge Address Book Enabled No Yes
 Image Orientation Landscape No Yes 4-43
 Preview Setting
• Received Data Image Check Setting Disabled No Yes 4-60
 Default List/Thumbnail Display No Yes
1-13
• Fax/I-Fax Reception Data*
1
Thumbnail No Yes
 Default Exposure Settings Auto No Yes 4-51
 Default Original Image Type Text No Yes 5-58
• Sending the same image sent in Fax mode Disabled No Yes 4-39
• Be sure to press Next Address Key ([+]) before
selecting the next address.
Disabled
No Yes 4-38
• Disable Switching of Display Order Disabled No Yes A
• Hold Setting for Received Data Print Disabled No Yes
4-60- Password – No Yes
- Change Password – No Yes