Setup Manual

EN 12
Specifications, etc.
Specifications
LCD panel
Display size 120" class (106-1/32 inches (2693.28 mm) wide x 60-17/64 inches (1530.72 mm) long/120-1/32 inches (3048.82 mm) diagonal)
Drive system TFT (thin-film transistor) active-matrix drive system
Pixel count 7,680 (horizontal) x 4,320 (vertical) pixels
Light source used LED
Speaker Tweeter x 2 pcs, Middle range x 2 pcs, subwoofer x 2 pcs
Maximum effective output power 70 W (10 W+10 W+10 W+10 W+15 W+15 W)
Operating temperature 32°F (0°C) to 104°F (40°C)
Applied power supply AC 200-240V 50/60Hz
Power consumption 1520 W (during standby: 0.5 W)
Connection terminal
HDMI input terminals (INPUT 1: HDR (PQ/HLG) compatible, INPUT 2: ARC-compatible) x 4,
HDMI (8K) input terminal (INPUT 7: HDR (PQ/HLG) compatible, HDMI x 4) x 1,
HDMI (8K) input terminal (INPUT 8: HDR (PQ/HLG) compatible, HDMI x 1) x 1,
AV input (Shared with audio input) terminal x 1, analog audio output terminal x 1,
digital audio output (optical) terminal x 1, headphone terminal x 1, USB terminals x 2,
LAN terminal (10BASE-T/100BASE-TX) x 1, analog RGB (PC input) terminal x 1
External dimension
W x D x H
The display only: approx. 106-31/32 x 6-13/16 x 61-21/32 inches (2717 x 173 x 1566 mm)
With the stand: approx. 106-31/32 x 31-11/16 x 77-29/32 inches (2717 x 805 x 1979 mm)
Weight
The display only: approx. 412.3 lbs (187 kg)
With the stand: approx. 454.1 lbs (206 kg)
As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal
values of production units. There may be some deviations from these values in individual units.
Continuous operating time and warranty. This product is designed for a maximum daily use of 16 hours. Continual use in excess of 16 hours per day is not covered by the warranty.