MX-5500N/6200N/7000N Operation-Manual Quick-Guide GB

Table Of Contents
84
NETWORK SCANNER FUNCTION
The network scanner function of the machine can be used to transmit scanned images by a variety of methods.
The network scanner function has the following modes.
*1 A USB memory device is a storage device that is connected via a USB interface.
*2 TWAIN is an interface standard used for scanners and other image input devices. When the TWAIN driver is
installed on your computer, you can use any TWAIN-compliant application to scan an image.
Scan to E-mail
The scanned file is sent by e-mail.
Scan to FTP
The scanned file is sent to a specified directory on an FTP server.
Scan to Network Folder
The scanned file can be sent to a shared folder on a computer on your network. Transmission is
possible to computers running Windows 98/Me/NT 4.0/2000/XP/Server 2003.
Scan to Desktop
The scanned file is sent to a specified folder on your computer. (To use Scan to Desktop, software
must be installed from the "Sharpdesk/Network Scanner Utilities" CD-ROM that accompanies the
machine. For the procedures for installing the software, see the Sharpdesk Installation Guide.)
Scan mode
A fax can be sent via the Internet.
This function requires the expense of an
Internet connection, however, if you
already have Internet service or
frequently send faxes, this function can
help reduce communication costs.
Internet Fax mode
You can scan an original using a
TWAIN*
2
compliant software application
on a computer on the same network as
the machine.
When you intend to edit the scanned
image, it is convenient to be able to
perform the scan operation from your
computer.
To use PC Scan mode, the scanner
driver must be installed from the
"Software CD-ROM" provided with the
machine. Operating systems that can be
used are Windows
98/Me/2000/XP/Server 2003.
PC Scan mode
The scanned file is sent to and stored in
a USB memory device*
1
connected to
the machine.
USB Memory mode
mx7000_gb_qck.book 84 ページ 2006年4月17日 月曜日 午前8時59分