MX-5500N/6200N/7000N Operation-Manual System-Settings-Guide GB
Table Of Contents
- Table of Contents
- About This Manual
- SYSTEM SETTINGS
- SYSTEM SETTINGS (GENERAL)
- SYSTEM SETTINGS (ADMINISTRATOR)
- Accessing the System Settings (Administrator)
- System Settings (Administrator) List
- User Control
- Energy Save
- Operation Settings
- Device Control
- Copy Function Settings
- Network Settings
- Printer Settings
- Image Send Settings
- Document Filing Settings
- List Print (Administrator)
- Security Settings
- Enable/Disable Settings
- Change Administrator Password
- Product Key
- Initialize and/or Store Settings
- SYSTEM SETTINGS FOR FAX
106
The following settings are for regular polling memory
using the Public Box.
Set Fax Polling Security
When the memory polling function is used, this setting
determines whether any machine will be allowed to poll
your machine, or only machines that have been stored in
your machine.
Add New
When the Polling Security Setting is enabled, use this
setting to store (or delete) the fax numbers of the
machines that are allowed to poll your machine. The
stored fax numbers are called passcode numbers. Up to
10 passcode numbers can be stored (maximum of 20
digits each).
Passcode Number Key List
This shows a list of the stored passcode numbers. A
number can be selected to delete it.
Fax Polling Security
Note that these settings do not apply to F-code polling
memory.