MX-5500N/6200N/7000N Operation-Manual System-Settings-Guide GB
Table Of Contents
- Table of Contents
- About This Manual
- SYSTEM SETTINGS
- SYSTEM SETTINGS (GENERAL)
- SYSTEM SETTINGS (ADMINISTRATOR)
- Accessing the System Settings (Administrator)
- System Settings (Administrator) List
- User Control
- Energy Save
- Operation Settings
- Device Control
- Copy Function Settings
- Network Settings
- Printer Settings
- Image Send Settings
- Document Filing Settings
- List Print (Administrator)
- Security Settings
- Enable/Disable Settings
- Change Administrator Password
- Product Key
- Initialize and/or Store Settings
- SYSTEM SETTINGS FOR FAX
13
Total Count
This function shows the page count in each mode. Touch the [Total Count] key to use the function.
Job Count
This displays or prints out the counts of all jobs.
Device Count
This is used to display or print the counts of the peripheral devices installed on the machine.
• A3 (11" x 17") size paper is counted as two sheets.
• Each sheet of paper used for automatic two-sided copying is counted as two pages (A3 (11" x 17") paper is counted as
four pages).
• An entered paper size of 384 mm (5-1/8") or larger is counted as two pages. (Four pages when two-sided copying is used.)
• Pages printed directly from the machine such as list prints are included in the "Other Prints" count.
• The items displayed (or printed) will vary depending on the machine specifications and peripheral devices installed.
• Document feeder
Each sheet is counted as two pages when two-sided scanning is performed.
• Stapler (when a finisher or saddle stitch finisher is installed)
Two-position stapling and pamphlet stapling are counted as "2".
• The items displayed (or printed) will vary depending on the machine specifications and peripheral devices installed.