MX-5500N/6200N/7000N Operation-Manual System-Settings-Guide GB
Table Of Contents
- Table of Contents
- About This Manual
- SYSTEM SETTINGS
- SYSTEM SETTINGS (GENERAL)
- SYSTEM SETTINGS (ADMINISTRATOR)
- Accessing the System Settings (Administrator)
- System Settings (Administrator) List
- User Control
- Energy Save
- Operation Settings
- Device Control
- Copy Function Settings
- Network Settings
- Printer Settings
- Image Send Settings
- Document Filing Settings
- List Print (Administrator)
- Security Settings
- Enable/Disable Settings
- Change Administrator Password
- Product Key
- Initialize and/or Store Settings
- SYSTEM SETTINGS FOR FAX
37
■ Printer Settings
■ Image Send Settings
Item Factory default setting Page
■ Printer Settings
70
● Default Settings 70
X Prohibit Notice Page Printing Enabled 70
X Prohibit Test Page Printing Disabled 70
X A4/Letter Size Auto Change Enabled 70
X Print Density Level
70 Colour 3
Black & White 3
X Bypass Tray Settings 70
Enable Detected Paper Size in Bypass Tray Disabled 70
Enable Selected Paper Type in Bypass Tray Enabled 70
Exclude Bypass-Tray from Auto Paper Select Disabled 70
X Job Spool Queuing Enabled 70
● Interface Settings 71
X Hexadecimal Dump Mode Disabled 71
X I/O Timeout 60 sec. 71
X Enable USB Port Enabled 71
X USB Port Emulation Switching Auto 71
X Enable Network Port Enabled 71
X Network Port Emulation Switching Auto 71
X Port Switching Method Switch at End of Job 71
● Auto Colour Calibration – 72
Item Factory default setting Page
■ Image Send Settings
73
● Operation Settings 73
X Other Settings 73
Default Display Settings Scan (fax when fax is installed)
73
• Hold settings for a while after scanning has been
completed
Disabled
• Switch Automatically to Copy Mode Screen Disabled