MX-5500N/6200N/7000N Operation-Manual System-Settings-Guide GB
Table Of Contents
- Table of Contents
- About This Manual
- SYSTEM SETTINGS
- SYSTEM SETTINGS (GENERAL)
- SYSTEM SETTINGS (ADMINISTRATOR)
- Accessing the System Settings (Administrator)
- System Settings (Administrator) List
- User Control
- Energy Save
- Operation Settings
- Device Control
- Copy Function Settings
- Network Settings
- Printer Settings
- Image Send Settings
- Document Filing Settings
- List Print (Administrator)
- Security Settings
- Enable/Disable Settings
- Change Administrator Password
- Product Key
- Initialize and/or Store Settings
- SYSTEM SETTINGS FOR FAX
44
*1 When a large capacity tray is installed.
*2 When a saddle stitch finisher or finisher is installed.
*3 When an inserter is installed.
*4 When a punch module is installed.
*5 When a colour-related problem has occurred.
*6 When network connection is enabled.
*7 When the Internet fax expansion kit is installed.
*8 When the facsimile expansion kit is installed.
● Image Send Settings 88
X Other Disabling 88
Disable Switching of Display Order Disabled 88
Disable Scan Function
88• USB Memory Scan Disabled
•PC Scan Disabled
X Settings to Disable Registration 88
Disable Registering Destination from Operation Panel Disabled 88
Disable Registering Destination on Web Page*
6
Disabled 89
Disable Registration Using Network Scanner Tools*
6
Disabled 89
X Settings to Disable Transmission 89
Disable [Resend] on Image Send Mode Disabled 89
Disable Selection from Address Book Disabled 89
Disable Direct Entry Disabled 89
Disable PC-I-Fax Transmission*
7
Disabled 89
Disable PC-Fax Transmission*
8
Disabled 89
● Document Filing Settings 89
X Disable Stamp for Reprinting Disabled 89
X Batch Print Settings
89 Selection of [All Users] is not allowed. Enabled
Selection of [User Unknown] is not allowed. Enabled
Item Factory default setting Page