Operation Manual, User's Manual

1-100
BEFORE USING THE MACHINE►LOADING PAPER
Important points when using label sheets
• Some labels may have to be loaded into the bypass tray in the specified orientation. Follow such instructions.
If a form is already printed on the
labels, and the print images and the preprinted form do not line up, adjust the
application or printer driver settings to rotate the print images.
• Do not use the following ty
pes of label sheets.
• Label sheets without an adhe
sive copy or label copy
• Label sheets with adhesive exposed
• Label sheets with a specified feed
ing direction that is not supported by the machine
• A label sheet that has already bee
n fed or has some labels removed
• Label sheets consisting of multiple sheets
• Label sheets that do not sup
port laser printing
• Label sheets that cannot withstand heat
• Label sheets that have perfora
tions in the backing paper
• Label sheets with slits in the
backing paper
• Non-standard label sheets
• Label sheets with adhesive that ha
s deteriorated due to prolonged storage or otherwise
• Label sheets with cutouts that expose the backing paper
• Curled or otherwise deformed label sheets
• Torn or creased label sheets
• Label sheets consisting of three sheets or more.
Loading paper
1
Open the bypass tray.
When loading paper larger than 8-1/2" x 11"R or A4R, pull
out the extension guide.
Pull the extension guide all the way out.
Do not place heavy objects on the bypass tray or press down on the tray.
2
Push the centre of the pressure plate
down until it locks into place.