Operation Manual, User's Manual

1-105
BEFORE USING THE MACHINE►HOW TO PLACE THE ORIGINAL
SELECTING A PROCEDURE FOR PLACING
THE ORIGINAL DEPENDING ON THE TYPE
AND STATUS OF THE ORIGINAL
Place the original in the automatic document feeder. Depending the type and status of the original, use the document
glass. Follow the instructions to select the method for placing the original.
Detectable original sizes
In "Settings (administrator)", select [System Settings] → [Common Settings] → [Device Control] → [Condition Settings]
→ [Original Size Detector Setting].
Original Size Detector Setting
One of the 8 groups of standard original sizes shown below can be selected for detection by the original size detection
function.
Cancel Detection at Document Glass
Original size detection o
n the document glass can be disabled. When this is done, all originals placed on the document
glass are treated as special size originals.
HOW TO PLACE THE ORIGINAL
Selections
Detectable original sizes
Document glass Document feeder tray (automatic document
feeder)
AB-1 A3, A4, A4R, A5, B4, B5, B5R
11" x 17", 8-1/2" x 14", 8-1/2" x 11", A3, A4, A4R, A5,
B4, B5, B5R
AB-2 A3, A4, A4R, A5, B5, B5R
A3, A4, A4R, A5, B4, B5, B5R, 11"x17", 8-1/2"x11",
216 mm x 330 mm (8-1/2"x13")
AB-3 A3, A4, A4R, A5, B4, 8K, 16K, 16KR
A3, A4, A4R, A5, B4, 11"x17", 8-1/2"x11", 216 mm x
330 mm (8-1/2"x13"), 8K, 16K, 16KR
AB-4 A3, A4, A4R, A5, B5, B5R
A3, A4, A4R, A5, B4, B5, B5R, 11"x17", 8-1/2"x11",
216 mm x 340 mm (8-1/2"x13-2/5")
AB-5 A3, A4, A4R, A5, B5, B5R
A3, A4, A4R, A5, B4, B5, B5R, 11"x17", 8-1/2"x11",
216 mm x 343 mm (8-1/2"x13-1/2")
Inch-1 11" x 17", 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2"
11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8-1/2" x 11"R,
5-1/2" x 8-1/2", A3, A4
Inch-2 11" x 17", 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2"
11"x17", 216 mm x 330 mm (8-1/2"x13"), 8-1/2"x11",
8-1/2"x11"R, 5-1/2"x8-1/2", A3, A4
Inch-3 11" x 17", 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2"
11"x17", 8-1/2"x13-2/5 (216 mm x 340 mm),
8-1/2"x11", 8-1/2"x11"R, 5-1/2"x8-1/2", A3, A4
Original size when the automatic document feeder is open
When a thick original is set on the document glass and the automatic document feeder is not completely closed and the
original is scanned, the original size cannot be automatically detected. Set the original size manually.