C400 Operation-Manual Maintenance-Safety-Guide GB

REPLACING SUPPLIES AND MAINTENANCE

Insert the new developer cartridge horizontally.

Insert the new developer cartridge in the same location as the cartridge that

was removed.

• Do not tilt the developer cartridge or insert it in the wrong direction or

orientation. This may damage the developer cartridge or drum

cartridge and cause failure.

• When inserting the developer cartridge, grasp it with both hands at

the middle.

• Do not remove the seal from the developer cartridge until the

cartridge is installed in the machine. If the seal is removed when the

cartridge is not locked, the cartridge may fall out of the machine.

Insert with the arrow on the cartridge aligned with the arrow on the

machine.

Grasp the developer cartridge lock and replace it

on the machine.