mxc380p_en_saf_01.fm -1 ページ ２０１０年３月１５日 月曜日 午後３時１９分 MODEL: MX-C380P MX-C380P DIGITAL FULL COLOUR PRINTER Safety Guide Safety Guide Please read first Please read this guide first to ensure safe use of the machine. Before installing this product, be sure to read the "CAUTIONS" and "INSTALLATION REQUIREMENTS" sections.
mxc380p_en_saf.book 0 ページ ２０１０年３月１１日 木曜日 午後１時７分 Each instruction also covers the optional units used with these products. Caution! For complete electrical disconnection, pull out the main plug. The socket-outlet shall be installed near the equipment and shall be easily accessible. Shielded interface cables must be used with this equipment to maintain compliance with EMC regulations.
mxc380p_en_saf.book 1 ページ ２０１０年３月１１日 木曜日 午後１時７分 EMC (this machine and peripheral devices) Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
mxc380p_en_saf_01.fm 2 ページ ２０１０年３月２６日 Contents CAUTIONS . . . . . . . . . . . . . . . . . 4 Laser information . . . . . . . . . . . . 9 INSTALLATION REQUIREMENTS . . 10 SUPPLIES. . . . . . . . . . . . . . . . . 12 Storage of supplies. . . . . . . . . . 12 Supply of spare parts and consumables . . . . . . . . . . . . . . 12 SPECIFICATIONS . . . . . . . . . . 13 Machine specifications . . . . . . . 13 Continuous printing speeds . . . 17 Ambient environment . . . . . . . .
mxc380p_en_saf.book 3 ページ ２０１０年３月１１日 木曜日 午後１時７分 Note: • Considerable care has been taken in preparing this manual. If you have any comments or concerns about the manual, please contact your dealer or nearest authorised service representative. • This product has undergone strict quality control and inspection procedures. In the unlikely event that a defect or other problem is discovered, please contact your dealer or nearest authorised service representative.
mxc380p_en_saf.book 4 ページ ２０１０年３月１１日 木曜日 午後１時７分 CAUTIONS Symbols in this manual To ensure safe use of the machine, this manual uses various safety symbols. The safety symbols are classified as explained below. Be sure you understand the meaning of the symbols when reading the manual. WARNING Indicates a risk of death or serious injury. CAUTION Indicates a risk of human injury or property damage. Meaning of the symbols The symbol indicates the need for caution.
mxc380p_en_saf.book 5 ページ ２０１０年３月１１日 木曜日 午後１時７分 CAUTIONS WARNING Do not make any modifications to this machine. Doing so may result in personal injury or damage to the machine. If you notice smoke, a strange odor, or other abnormality, do not use the machine. If used in this condition, fire or electrical shock may result. Immediately switch off the main power and remove the power plug from the power outlet. Contact your dealer or nearest authorised service representative.
mxc380p_en_saf.book 6 ページ ２０１０年３月１１日 木曜日 午後１時７分 CAUTIONS CAUTION Do not install the machine on an unstable or slanted surface. Install the machine on a surface that can withstand the weight of the machine. There is a risk of injury due to the machine falling or toppling. If peripheral devices are to be installed, do not install on an uneven floor, slanted surface, or otherwise unstable surface. There is a danger of slippage, falling, and toppling.
mxc380p_en_saf.book 7 ページ ２０１０年３月１１日 木曜日 午後１時７分 CAUTIONS CAUTION The fusing unit is hot. When removing a misfeed, do not touch the fusing unit. Take care not to burn yourself. Fusing unit When loading paper, removing a misfeed, performing maintenance, closing the front and side covers, and inserting and removing trays, take care that your fingers are not pinched. If you will not use the machine for a long time, be sure to remove the power plug from the outlet for safety.
mxc380p_en_saf.book 8 ページ ２０１０年３月１１日 木曜日 午後１時７分 CAUTIONS The machine includes the print hold function, which stores document image data on the machine's hard drive. Stored documents can be called up and printed as needed. If a hard drive failure occurs, it will no longer be possible to call up the stored document data. To prevent the loss of important documents in the unlikely event of a hard drive failure, store the original data elsewhere.
mxc380p_en_saf.book 9 ページ ２０１０年３月１１日 木曜日 午後１時７分 CAUTIONS Laser information Wave length 790 nm ± 10 nm Pulse times (North America and Europe) 4.1 µs ± 4.1 ns / 7 mm Output power Max 0.6 mW (LD1+ LD2) Caution Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This Digital Equipment is CLASS 1 LASER PRODUCT (IEC 60825-1 Edition 1.
mxc380p_en_saf.book 10 ページ ２０１０年３月１１日 木曜日 午後１時７分 INSTALLATION REQUIREMENTS The performance of the machine is affected by the ambient conditions of the installation location. Do not install in the following locations: CAUTION: Do not install the machine in a location with poor air circulation. A small amount of ozone is created inside the machine during printing.
mxc380p_en_saf.book 11 ページ ２０１０年３月１１日 木曜日 午後１時７分 INSTALLATION REQUIREMENTS Dusty locations Locations with ammonia gas If dust enters the machine, dirty output and machine failure may result. Installing the machine next to a diazo copy machine may cause dirty output. Locations exposed to direct sunlight Locations subject to vibration. Plastic parts may become deformed and dirty output may result. Vibration may cause failure. The machine includes a built-in hard drive.
mxc380p_en_saf.book 12 ページ ２０１０年３月１１日 木曜日 午後１時７分 SUPPLIES Standard supplies for this product that can be replaced by the user include paper, toner cartridges, and staple cartridges for the finisher. Be sure to use only SHARP-specified products for the toner cartridges, finisher staple cartridge, and transparency film. For best printing results, be sure to use only Sharp Genuine Supplies which are designed, engineered, and tested to maximize the life and performance of Sharp products.
mxc380p_en_saf.book 13 ページ ２０１０年３月１１日 木曜日 午後１時７分 SPECIFICATIONS Machine specifications Name Digital Full Colour Printer MX-C380P Type Desktop Display 4.
mxc380p_en_saf.book 14 ページ ２０１０年３月１１日 木曜日 午後１時７分 SPECIFICATIONS Machine specifications (Continued) Warm-up time*1 90 seconds or less First-print time*2 Colour print time:8.9 seconds or less Black and white print time: 8.0 seconds or less Paper sizes: Tray 1 A4, B5, A5, 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 7-1/4" x 10-1/2", 5-1/2" x 8-1/2", 16K (Includes automatic paper size detection function.) Paper weight: Plain paper (60 g/m2 to 105 g/m2 (16 lbs.
mxc380p_en_saf.book 15 ページ ２０１０年３月１１日 木曜日 午後１時７分 SPECIFICATIONS Machine specifications (Continued) Duplex module Paper sizes: A4, B5, A5, 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 5-1/2" x 8-1/2", 16K Paper weight: Plain paper (60 g/m2 to 105 g/m2 (16 lbs. to 28 lbs.
mxc380p_en_saf.book 16 ページ ２０１０年３月１１日 木曜日 午後１時７分 SPECIFICATIONS Machine specifications (Continued) Required power supply Local voltage ±10% (For the power supply requirements, see the name plate in the lower corner of the left side of the machine.) Power consumption 1.84 kW (220-240 V) / 1.44 kW (100-127 V) Dimensions 560 mm (W) x 438 mm (D) x 610 mm (H) (22-3/64" (W) x 17-1/4" (D) x 24-1/64" (H)) Weight Approx. 44 kg (97.0 lbs.
mxc380p_en_saf.book 17 ページ ２０１０年３月１１日 木曜日 午後１時７分 SPECIFICATIONS Continuous printing speeds* Print ratio 100% / Reduced / Enlarged Print mode Colour B/W A4, B5, 16K 38 pages/min. 38 pages/min. 8-1/2" x 11", 7-1/2" x 10"-1/2" 40 pages/min. 40 pages/min. * Print speed during output of the second print and following prints when performing continuous one-sided printing of the same page (excluding offset output) using plain one-sided paper from a tray other than the bypass tray.
mxc380p_en_saf_02.fm 18 ページ ２０１０年４月６日 火曜日 午前１１時１９分 SPECIFICATIONS Acoustic noise emission (measurement according to ISO7779) Sound power level LwA Printing mode (continuous printing) Colour: 7.1 B B/W: 7.1 B Standby mode 4.
mxc380p_en_saf.book 19 ページ ２０１０年３月１１日 木曜日 午後１時７分 SPECIFICATIONS 500-sheet paper feed unit specifications Model MX-CSX1 (tray 2) Paper sizes A4, B5, A5*, 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 7-1/4" x 10-1/2", 5-1/2" x 8-1/2"*, 16K Paper weight Plain paper (60 g/m2 to 105 g/m2 (16 lbs. to 28 lbs.)) Paper capacity 500 sheets (80 g/m2 (21 lbs.
mxc380p_en_saf_02.fm 20 ページ ２０１０年３月２６日 金曜日 午後４時４４分 SPECIFICATIONS Finisher specifications Model MX-FN12 Paper sizes A4, B5, A5, 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 7-1/4" x 10-1/2", 5-1/2" x 8-1/2", envelopes, 16K Paper weight Thin paper (55 g/m2 to 59 g/m2 (15 lbs. to 16 lbs.)) plain paper (60 g/m2 to 105 g/m2 (16 lbs. to 28 lbs.)) heavy paper (106 g/m2 to 209 g/m2 (28 lbs. bond to 110 lbs.
mxc380p_en_saf.book 21 ページ ２０１０年３月１１日 木曜日 午後１時７分 SPECIFICATIONS Finisher specifications (Continued) Maximum number of sheets for stapling*3 30 sheets *1 The maximum number of sheets that can be held varies depending on ambient conditions in the installation location, the type of paper, and the storage conditions of the paper. *2 Up to 20 envelopes can be output. *3 The maximum number of sheets for stapling assumes a paper weight of 90 g/m2 (24 lbs.
mxc380p_en_saf.book 22 ページ ２０１０年３月１１日 木曜日 午後１時７分 INFORMATION ON DISPOSAL A. Information on Disposal for Users (private households) 1. In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment.
23 ページ ２０１０年３月１１日 木曜日 午後１時７分 Information that the administrator of the machine requires is printed on the back of this page. (Separate this page from the manual and keep it in a safe place. In addition, fill in the name of the administrator and the administrator's contact information in the left hand margin.) Administrator Name: ✂ Contact at: mxc380p_en_saf.
mxc380p_en_saf.book 24 ページ ２０１０年３月１１日 木曜日 午後１時７分 TO THE ADMINISTRATOR OF THE MACHINE (Separate this page from the manual and keep it in a safe place.) Factory default passwords When accessing the system settings, the administrator password is required to log in with administrator rights. The system settings can be configured in the Web pages as well as on the operation panel. To access the system settings using the Web pages, a password is also required.
mxc380p_en_saf.book 25 ページ ２０１０年３月１１日 木曜日 午後１時７分 TO THE ADMINISTRATOR OF THE MACHINE Trademark acknowledgments The following trademarks and registered trademarks are used in conjunction with the machine and its peripheral devices and accessories. • Microsoft®, Windows®, Windows® 98, Windows® Me, Windows NT® 4.
mxc380p_en_saf.
mxc380p_en_saf.
mxc380p_en_saf.
mxc380p_en_saf.
mxc380p_en_saf.
