MX-M905 Product Brochure

Base Unit
MX-KB13 Keyboard
1. MX-MFX1 Multi Bypass Tray
(for main machine)
A5R-A3W, 100 sheets (80 g/m
2
)
Can be end of configuration.
2. MX-LC12 Large Capacity Tray (A4)
A4-B5, 3,500 sheets (80 g/m
2
)
Requires MX-MFX1. Cannot be installed
with MX-LC13N or MX-LCX3 N.
3. MX-LCX3 N Large Capacity Tray (A3)
Requires MX-MFX1. Cannot be installed
with MX-LC12 or MX-LC13N.
4. MX-MF11 Multi Bypass Tray
(for MX-LC13N)
A3-A5R, 500 sheets (80 g/m
2
).
5. MX-LC13N Large Capacity Tray
(2 drawers)
A3-A4, 2,500 sheets each (80 g/m
2
)
Requires MX-RB16. Cannot be installed
with MX-LC12 or MX-LCX3 N.
MX-RB16 Paper Pass Unit
(between machine and MX-LC13N)
Required if MX-LC13N is installed.
6. MX-SL10N Status Indicator lamp
Finishing
7. MX-RB18 Curl Correction Unit
Corrects paper by putting pressure on
the convex/concave curl
Required if MX-FN21 or MX-FN22 is installed.
8. MX-CF11 Inserter (200-sheet x 2 bin)
A3–A5R, 200 sheets each (80 g/m
2
)
Requires MX-RB18 and either
MX-RB13 or MX-FD10.
9. MX-GB50A GBC
SmartPunch Unit
Paper size A4
Available die sets:
21 holes, Plastic Comb
20 holes, Plastic Comb
47 holes, Color Coil
23 holes, Wire 2:1/Square
23 holes, Wire 2:1/Round
34 holes, Wire 3:1/Square
34 holes, Wire 3:1/Round
12 holes, VeloBind
34 holes, PloClick
2 holes/Round (8mm pin)
4 holes/Round (8mm pin)
2 holes/Round (6.5mm pin)
4 holes/Round (6.5mm pin)
4 holes Scandinavian
Custom die sets also available on request
Requires MX-RB13 and either MX-FN21 or MX-FN22.
10. MX-RB13 Relay Unit (between100-sheet Finisher and Inserter)
Must be installed if MX-FD10 is not required.
11. MX-RB13 Relay Unit
12. MX-FD10 Folding Unit
Folding options include Z, C,
accordion, double & half folds
Can only be installed with MX-FN21
or MX-FN22.
13. MX-FN21 Finisher
(4k - 100-sheet staple)
A3 - B5 (offset/staple), SRA3 - A5R
(non offset)
Upper tray: 1,500 sheets*
Middle tray: 250 sheets*
Lower tray: 2,500 sheets*
100-sheet* staple capacity
(front, rear or 2 point stitching)
Requires MX-RB18. Cannot be installed
with MX-FN22.
14. MX-FN22 Saddle Stitch Finisher
(4k - 100-sheet staple)
Requires MX-RB18. Cannot be installed
with MX-FN21.
(4k - 100-sheet staple)
A3 - B5 (offset/staple), SRA3 - A5R (non offset)
Upper tray: 1,500 sheets*
Middle tray: 250 sheets*
Lower tray: 2,500 sheets*
100-sheet* staple capacity
(front, rear or 2 point stitching)
Saddle stitch tray: 5 sets (16-20 sheets),
10 sets (11-15 sheets), 15 sets (6-10 sheets),
25 sets (1-5 sheets). Max 20 sheets per set.
Requires MX-RB18. Cannot be installed with MX-FN21.
MX-PN13A/C/D Punch Module (A: 2, C: 2/4, D: 4 wide)
Requires MX-FN21 or MX-FN22
MX-TM10 Trimming Module
Can only be installed with MX-FN22
15. MX-FN24 Finisher (3k - 50-sheet staple)
A3-B5R (offset/staple), A3W – A5R (non offset)
Offset tray: 3,000 sheets*
Top tray: 250 sheets*
50-sheet* staple capacity
(front, rear or 2 point stitching)
Cannot eject SRA3 paper, cannot be installed
with MX-FN24.
16. MX-FN25 Saddle Stitch Finisher
(2k - 50-sheet staple)
A3-B5R (offset/staple), A3W – A5R (non offset)
Offset tray: 2,000 sheets*
Top tray: 250 sheets*
50-sheet* staple capacity
(front, rear or 2 point stitching)
Saddle stitch tray: 10 sets (11-15 sheets),
15 sets (6-10 sheets), 30 sets (2-5 sheets)
Cannot eject SRA3 paper, cannot be installed
with MX-FN24.
MX-PNX4A/C/D Punch Module (A: 2, C: 2/4, D: 4 wide)
Requires MX-FN24 or MX-FN25.
10