DIGITAL MULTIFUNCTIONAL SYSTEM MX-M364N/MX-M464N/MX-M564N QUICK START GUIDE CONTENTS CAUTIONS ___________________________________________ 3 PART NAMES ________________________________________ 7 TURNING THE POWER ON AND OFF _____________________ 8 OPERATION MANUALS AND HOW TO USE THEM ��������� 9 SPECIFICATIONS ____________________________________ 10 TO THE ADMINISTRATOR OF THE MACHINE _____________ 14 INFORMATION ON DISPOSAL __________________________ 15 Keep this manual close at hand for reference whe
For the users of the fax function Caution! For complete electrical disconnection, pull out the main plug. The socket-outlet shall be installed near the equipment and shall be easily accessible. � FAX interface cable and Line cable: Shielded interface cables must be used with this equipment to maintain compliance with EMC regulations. These special accessories must be used with the device. The equipment should be installed near an accessible socket outlet for easy disconnection.
CAUTIONS Symbols in this manual To ensure safe use of the machine, this manual uses various safety symbols. The safety symbols are classified as explained below. Be sure you understand the meaning of the symbols when reading the manual. Meaning of the symbols CAUTION! HOT PINCH POINT KEEP CLEAR WARNING Indicates a risk of death or serious injury. PROHIBITED ACTIONS DO NOT DISASSEMBLE CAUTION Indicates a risk of human injury or property damage.
Installation notes Do not install the machine in a location with poor air circulation. A small amount of ozone is created inside the machine during printing. The amount of ozone created is not sufficient to be harmful; however, an unpleasant odor may be noticed during large copy runs, and thus the machine should be installed in a room with a ventilation fan or windows that provide sufficient air circulation. (The odor may occasionally cause headaches.
Handling precautions WARNING CAUTION Do not place a container of water or other liquid, or a metal object that might fall inside, on the machine. Do not look directly at the light source. Doing so may damage your eyes. If the liquid spills or the object falls into the machine, fire or electrical shock may result. Do not remove the machine casing. Do not block the ventilation ports on the machine. Do not install the machine in a location that will block the ventilation ports.
� Caution � Staple cartridge Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. The finisher and saddle finisher require the following staple cartridge: MX-SCX1 (for finisher and saddle finisher) Approx. 5000 per cartridge x 3 cartridges AR-SC2 (for finisher (large stacker) and saddle stitch finisher (large stacker)) Approx.
PART NAMES Operation panel PRINT mode indicators ( • READY indicator Automatic document feeder ) Print jobs can be received when this indicator is lit. USB connector (A type) • DATA indicator This blinks while print data is being received and lights steadily while printing is taking place.
TURNING THE POWER ON AND OFF This machine has two power switches. The main power switch is at the bottom left after the front cover is opened. The other power switch is the [POWER] key ( ) on the operation panel. Turning on the power (1) Switch the main power switch to the “ (2) Press the [POWER] key ( ” position. ) to turn on the power. Turning off the power (1) Press the [POWER] key ( ) to turn off the power. (2) Switch the main power switch to the “ Main power switch ” position.
OPERATION MANUALS AND HOW TO USE THEM Operation manuals How to read the Operation Guide The instructions for this manual are separated in the following three sections. The [Operation Guide] can be downloaded from the machine and viewed on a computer. You can download the [Operation Guide] following the procedures below while the machine is connected to the network.
SPECIFICATIONS Basic Specifications / Copier specifications Name MX-M364N/MX-M464N/MX-M564N Type Desktop Colour Monochrome Copier system Laser electrostatic copier Same size: 1:1 ± 0.8 % Scan (Document glass): 600 × 600 dpi, 600 × 400 dpi, 600 × 300 dpi Scanning resolution Copy rations Enlarge: 115 %, 122 %, 141 %, 200 %, 400 % Reduce: 25 %, 50 %, 70 %, 81 %, 86 % Zoom range: 25 to 400 % (25 - 200 % using RSPF) in 1 % increments, total 376 increments.
Required power supply Tray 2 / 3 / 4 / 5 Name Tray 2 (MX-DE12)*1 Paper sizes A3 (11" × 17") to A5R (5-1/2" × 8-1/2"R) A4 (8-1/2" × 11") 60 g/m2 (16 lbs. bond) to 220 g/m2 (80 lbs. cover) 60 g/m (16 lbs. bond) to 105 g/m2 (28 lbs. bond) Useable paper Paper capacity 500 sheets Tray 2/3 (MX-DE13)*2 Tray 2/3/4 Tray 5 (MX-DE14)*3 (MX-LC11)*4 1,000 (500 × 2) 1,500 (500 × 3) 3,500 Dimensions 376 mm (W) × 523 mm (D) × 575 mm (H) (14-53/64" (W) × 20-19/32" (D) × 22-41/64" (H)) Weight Approx.
Saddle stitch finisher Name Paper sizes Useable paper No. of trays Tray capacity (80 g/m2 (21 lbs.)) Required power supply Weight Dimensions Max. no. of stapled sheets (90 g/m2 (24 lbs.)) Staple position Staple method (for saddle stitch) Saddle stitch fold position Saddle usable sizes Saddle usable paper weight Max. no. of saddle-stitched sheets Finisher (large stacker) Saddle Stitch Finisher (MX-FN10) Depends on feeder specifications Paper weight 55 g/m2 (13 lbs.) to 300 g/m2 (110 lbs.
Fax Specifications Network Scanner Specifications Name Facsimile expansion kit (MX-FX11) Useable lines General phone lines (PSTN), automated branch exchange (PBX) Connection speed Super G3: 33.6 kbps, G3: 14.4 kbps Coding method MH, MR, MMR, JBIG 50 to 9,600 dpi *1 (pull scan) Connection mode Super G3 / G3 B/W 56 sheets/minute (200 × 200 dpi) (one-sided) A3 (11" × 17") to A5 (5-1/2" × 8-1/2") (Paper with a max.
TO THE ADMINISTRATOR OF THE MACHINE This function can be used by the administrator of the machine to archive all transmitted and received System settings password data. To configure the document administration settings, click [Application Settings] and then [Document A password is necessary to change the machine’s system settings using administrator authority. System Administration Function] in the Web page menu. (Administrator rights are required.
INFORMATION ON DISPOSAL Information on Disposal for Users (private households) � In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment.
MX-M364N/MX-M464N/MX-M564N QUICK START GUIDE PRINTED IN FRANCE TINSE5226GHZZ